Lubricated Loaded Tooth Contact Analysis and Non-Newtonian Thermoelastohydrodynamics of High-Performance Spur Gear Transmission Systems
Open Access
- 14 February 2020
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 8 (2) , 20
Abstract
Energy efficiency and functional reliability are the two key requirements in the design of high-performance transmissions. Therefore, a representative analysis replicating real operating conditions is essential. This paper presents the thermoelastohydrodynamic lubrication (TEHL) of meshing spur gear teeth of high-performance racing transmission systems, where high generated contact pressures and lubricant shear lead to non-Newtonian traction. The determination of the input contact geometry of meshing pairs as well as contact kinematics are essential steps for representative TEHL. These are incorporated in the current analysis through the use of Lubricated Loaded Tooth Contact Analysis (LLTCA), which is far more realistic than the traditional Tooth Contact Analysis (TCA). In addition, the effects of lubricant and flash surface temperature rise of contacting pairs, leading to the thermal thinning of lubricant, are taken into account using a thermal network model. Furthermore, high-speed contact kinematics lead to shear thinning of the lubricant and reduce the film thickness under non-Newtonian traction. This comprehensive approach based on established TEHL analysis, particularly including the effect of LLTCA on the TEHL of spur gears, has not hitherto been reported in literature.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/L014998/1)
This publication has 47 references indexed in Scilit:
- Transmission efficiency and noise, vibration and harshness refinement of differential hypoid gear pairsProceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics, 2013
- Tribology of piston compression ring conjunction under transient thermal mixed regime of lubricationTribology International, 2013
- An Experimental Investigation of Spur Gear EfficiencyJournal of Mechanical Design, 2008
- Design, manufacture, stress analysis, and experimental tests of low-noise high endurance spiral bevel gearsMechanism and Machine Theory, 2006
- Modeling of Film Thickness and Traction in a Variable Ratio Traction Drive RigJournal of Tribology, 2004
- NON-LINEAR DYNAMIC RESPONSE OF A SPUR GEAR PAIR: MODELLING AND EXPERIMENTAL COMPARISONSJournal of Sound and Vibration, 2000
- Effect of Involute Tip Relief on Dynamic Response of Spur Gear PairsJournal of Mechanical Design, 1999
- A MATHEMATICAL MODEL FOR ANALYZING THE INFLUENCE OF SHAPE DEVIATIONS AND MOUNTING ERRORS ON GEAR DYNAMIC BEHAVIOURJournal of Sound and Vibration, 1996
- A New Fatigue Life Model for Rolling BearingsJournal of Tribology, 1985
- New Results of Traction Force Calculations in Elastohydrodynamic ContactsJournal of Tribology, 1985