Predicting Frictional Pressure Loss During Horizontal Drilling for Non-Newtonian Fluids
Authors:
- 31 January 2011
- journal article
- research article
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 33 (7) , 631-640
Abstract
Accurate estimation of the frictional pressure losses for non-Newtonian drilling fluids inside annulus is quite important to determine pump rates and select mud pump systems during drilling operations. The purpose of this study is to estimate frictional pressure loss and velocity profile of non-Newtonian drilling fluids in both concentric and eccentric annuli using an Eulerian-Eulerian computational fluid dynamics (CFD) model. An extensive experimental program was performed in METU-PETE Flow Loop using two non-Newtonian drilling fluids including different concentrations of xanthan biopolimer, starch, KCl and soda ash, weighted with barite for different flow rates and frictional pressure losses were recorded during each test. This study aims to simulate non-Newtonian fluids flow through both horizontal concentric and eccentric annulus and to predict frictional pressure losses using an Eulerian-Eulerian computational fluid dynamics (CFD) model. Computational fluid dynamic simulations were performed to compare with experimental data gathered at the METU-PETE flow loop and previous studies as well as slot flow approximation for the annulus. Results show that the computational fluid dynamic model simulations are capable of estimating frictional pressure drop with an error of less than 10% in most cases, more accurately than the slot equation.Keywords
This publication has 11 references indexed in Scilit:
- Friction pressure correlations for turbulent flow of drag reducing polymer solutions in straight and coiled tubingJournal of Petroleum Science and Engineering, 2009
- Laminar, transitional and turbulent flow of Herschel–Bulkley fluids in concentric annulusThe Canadian Journal of Chemical Engineering, 2008
- Fully developed laminar flow of purely viscous non-Newtonian liquids through annuli, including the effects of eccentricity and inner-cylinder rotationInternational Journal of Heat and Fluid Flow, 2002
- Non-Newtonian Flow in Eccentric AnnuliJournal of Energy Resources Technology, 1990
- Flow of a Power-Law Fluid in an Eccentric AnnulusSPE Drilling Engineering, 1989
- An Accurate Slot-Flow Model for Non-Newtonian Fluid Flow Through Eccentric AnnuliSociety of Petroleum Engineers Journal, 1981
- NON-NEWTONIAN FLUID FLOW IN AN ECCENTRIC ANNULUSJOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1974
- Axial Laminar Flow of Non-Newtonian Fluids in Narrow Eccentric AnnuliSociety of Petroleum Engineers Journal, 1965
- A green's function solution for the case of laminar incompressible flow between non-concentric circular cylindersJournal of the Franklin Institute, 1959
- Non-Newtonian Flow in AnnuliIndustrial & Engineering Chemistry, 1958