Microstructures and mechanical properties in laser beam welds of titanium matrix composites
Authors:
- 1 February 2014
- journal article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 19 (2) , 142-149
Abstract
Laser beam welding (LBW) was used to 2 mm thick titanium matrix composites (TMCs) sheets and microstructure, hardness and tensile properties of butt joints were studied. Welded joints without defects were obtained indicating that LBW is a suitable processing method for TMCs. The results reveal that the fusion zone completely consists of α′ martensite causing an increase of more 27% in hardness compared with that of base metal. The heat affected zone consists of a mixture of α′ martensite and primary α phases. Large gradients of microstructures and hardness are found over the narrow heat affected zone dependent on the β-transus temperature during weld cooling. TiBw with smaller sizes redistribute at grain boundaries in the weld. The joints show excellent strength and they can reach the full strength compared with the base metal with sound welding parameters, which is ascribed to the presence of α′ martensite and refinement of TiBw in the weld.Keywords
This publication has 23 references indexed in Scilit:
- Weld zone characteristic and mechanical performance of in situ titanium matrix composites using gas tungsten arc welding (GTAW)Science and Technology of Welding and Joining, 2012
- Mechanical properties and strengthening mechanisms in laser beam welds of pure titaniumScience and Technology of Welding and Joining, 2011
- Thermal stability of in situ synthesized (TiB+La2O3)/Ti compositeMaterials Science and Engineering: A, 2011
- In situ (TiBw+TiCp)/Ti6Al4V composites with a network reinforcement distributionMaterials Science and Engineering: A, 2010
- Processing-structure-property aspects of particulate- and whisker-reinforced titanium matrix compositesComposites Science and Technology, 2008
- Mechanical and metallurgical properties of friction-welded TiC particulate reinforced Ti–6Al–4VComposites Science and Technology, 2004
- Microstructure and tensile properties of in situ synthesized (TiB+Y2O3)/Ti composites at elevated temperatureMaterials Science and Engineering: A, 2003
- Mechanical properties of Ti-6Al-4V/TiB composites with randomly oriented and aligned TiB reinforcementsActa Materialia, 2003
- Laser-beam welding of SiC fibre-reinforced Ti-6Al-4V compositeJournal of Materials Science, 1993
- Diffusion bonding of SiC fibre reinforced Ti–6Al–4V alloyMaterials Science and Technology, 1992