Modified deformation behaviour of self-ion irradiated tungsten: A combined nano-indentation, HR-EBSD and crystal plasticity study
Preprint
Abstract
Predicting the dramatic changes in material properties caused by irradiation damage is key for the design of future nuclear fission and fusion reactors. Self-ion implantation is an attractive tool for mimicking the effects of neutron irradiation. However, the damaged layer of implanted samples is only few microns thick, making it difficult to estimate macroscopic properties. Here we address this challenge using a combination of experimental and modelling techniques. We concentrate on self-ion-implanted tungsten, the front-runner for fusion armour components and a prototypical bcc material. To capture dose-dependent evolution of properties, we experimentally characterise samples with damage levels from 0.01 to 1 dpa. Spherical nano-indentation of grains shows hardness increasing up to a dose of 0.032 dpa, beyond which it saturates. AFM measurements show pile-up increasing up to the same dose, beyond which large pile-up and slip-steps are seen. Based on the observations we develop a crystal plasticity (CPFE) model for the irradiated material. It captures irradiation-induced hardening followed by strain-softening through interaction of irradiation-defects and gliding dislocations. Shear resistance of irradiation-defects is derived from TEM observations of similarly irradiated samples. Nano-indentation of pristine and implanted tungsten of doses 0.01, 0.1, 0.32 and 1 dpa is simulated. Two model parameters are fitted to the experimental results of the 0.01 dpa sample and are kept unchanged for all other doses. Peak load, indent surface profiles and damage saturation predicted by the CPFE model closely match experimental observations. Predicted lattice distortions and dislocation distributions around indents agree with corresponding measurements from HR-EBSD. Finally, the CPFE model is used to predict the macroscopic stress-strain response of similarly irradiated bulk tungsten material.Keywords
All Related Versions
This publication has 111 references indexed in Scilit:
- Recent advances in characterising irradiation damage in tungsten for fusion powerSN Applied Sciences, 2019
- Positron annihilation characteristics in UO2: for lattice and vacancy defects induced by electron irradiationphysica status solidi (c), 2007
- Denuded zones, diffusional creep, and grain boundary slidingMetallurgical and Materials Transactions A, 2002
- Analysis of elastic and plastic deformation associated with indentation testing of thin films on substratesInternational Journal of Solids and Structures, 1988
- Quantitative evidence for dislocation emission from grain boundariesScripta Metallurgica, 1979
- Thermodynamic analysis of dislocation glide controlled by dispersed local obstaclesMaterials Science and Engineering, 1969
- Die versetzungsanordnung in plastisch verformten kupfer-vielkristallenActa Metallurgica, 1968
- A Model of “Lattice” Hardening in Irradiated Copper Crystals with the External Characteristics of “Source” HardeningPhysica Status Solidi (b), 1965
- Lattice Constants and Thermal Expansion of Palladium and Tungsten up to 878 °C by X‐Ray MethodPhysica Status Solidi (b), 1963
- Some geometrical relations in dislocated crystalsActa Metallurgica, 1953