Influences of Specimen Geometry and Loading Rate on Compressive Strength of Unstabilized Compacted Earth Block
Authors:
Open Access
- 1 January 2018
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2018 (1)
Abstract
Loading rate and specimen geometry are critical parameters used in simple compressive tests to determine the strength of earth materials. In this study, cubic and cylindrical unstabilized compacted earth block of different sizes were manufactured and tested in unconfined compression to investigate the size and shape effects on the compressive strength of earth materials under different loading rates. The correlation between the compressive strength of earth materials and the geometric parameters of the specimen was determined. The recommended loading rate and sample for testing the compressive strength of earth materials were given. Finally, a constitutive model for describing the stress‐strain response of earth materials was proposed. This model modifies the defects of the constitutive equations suggested in previous studies and may be applied to the numerical analysis of earth structure.Keywords
Funding Information
- National Natural Science Foundation of China (51478043)
This publication has 23 references indexed in Scilit:
- Adobe bricks under compression: Experimental investigation and derivation of stress–strain equationConstruction and Building Materials, 2014
- Low carbon and low embodied energy materials in buildings: A reviewRenewable and Sustainable Energy Reviews, 2013
- Influence of the testing procedures in the mechanical characterization of adobe bricksConstruction and Building Materials, 2013
- In situ characterization of archaeological adobe bricksConstruction and Building Materials, 2013
- Strength and stress–strain characteristics of traditional adobe block and masonryMaterials and Structures, 2012
- Earth construction: Lessons from the past for future eco-efficient constructionConstruction and Building Materials, 2012
- Experimental investigation on the compressive strength of cored and molded cement-stabilized rammed earth samplesConstruction and Building Materials, 2012
- Compressive strength testing of compressed earth blocksConstruction and Building Materials, 2007
- On Earth Stabilization with Natural Polymers for Earth Masonry ConstructionMaterials and Structures, 2006
- Characteristics of soil-cement blocks using highly sandy soilsMaterials and Structures, 2005