Solid state polymerization of bisphenol A polycarbonate: Effect of the crystallization method and polymerization conditions
Authors:
- 30 June 2014
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 55 (5) , 1024-1029
Abstract
A study on the effect of the crystallization method on the solid state polymerization (SSP) process of bisphenol A polycarbonate has been performed. Prepolymer samples were crystallized via four different techniques (solvent induced, shear induced, organic salt induced, and thermal crystallization) and SSP progress was checked by measuring the molecular weight increase. The fastest polymerization rate was obtained with prepolymers crystallized with acetone. The reaction rates were correlated with the crystallinity and plasticization of solvents, which both affected the chain mobility. The experiments conducted using different sweep gas flow rates and different particle sizes showed that, for the acetone‐crystallized prepolymers, the reaction rate was limited by the by‐product diffusion inside the polymer particles and from the surface of the particles into the sweep gas. 1H‐nuclear magnetic resonance analysis proved that polymers prepared through a solid state process had a consistently lower content of Fries rearrangement by‐products with respect to commercial samples obtained by standard melt polycondensation methods. POLYM. ENG. SCI., 55:1024–1029, 2015. © 2014 Society of Plastics EngineersKeywords
This publication has 18 references indexed in Scilit:
- Polycarbonates2011
- Advances in Polycarbonates2005
- Solid state polymerizationProgress in Polymer Science, 2005
- Branching Reactions in Polycarbonate: A Density Functional StudyMacromolecules, 2003
- Comparison of the photochemical and thermal degradation of bisphenol-A polycarbonate and trimethylcyclohexane–polycarbonatePolymer Degradation and Stability, 2002
- Crystallization and Solid-State Polymerization of Poly(bisphenol A carbonate) Facilitated by Supercritical CO2Macromolecules, 1999
- Solid-State Polymerization of Polycarbonates Using Supercritical CO2Macromolecules, 1999
- Solid-state polymerization of poly(aryl carbonates): a facile route to high-molecular-weight polycarbonatesMacromolecules, 1993
- Solid-state Polymerization1989
- Review of the Toxicity of Long-Term Phosgene ExposureArchives of Environmental Health: An International Journal, 1974