Low‐temperature sintered conductive silver patterns obtained by inkjet printing for plastic electronics
- 25 February 2010
- journal article
- research article
- Published by Wiley in Surface and Interface Analysis
- Vol. 42 (6-7) , 1163-1167
Abstract
Silver metal patterns onto plastic substrates have been obtained by inkjet printing with commercial ink based on silver nanoscale particles. Morphological characterization by scanning electron microscopy of spin‐coating processed films indicates that a sintering treatment at 250 °C for 30 min is enough to sinterize the silver metal nanoparticles. X‐ray photoelectron spectroscopy characterization of sintered metal films shows that the sinterization is accompanied by a reduction of carbon surface concentration coming from carbon‐containing chemical compounds present in the ink formulation. After sintering at 250 °C for 30 min, the material shows typical electrical resistivity of 4.6 × 10 −6 Ωcm (i.e. about three times the value of bulk silver). Printed test structures show typical resistivity after sintering at 250 °C for 30 min in the range of 5–7 × 10 −6 Ωcm. Copyright © 2010 John Wiley & Sons, Ltd.Keywords
This publication has 11 references indexed in Scilit:
- Synthesis, Characterization, and Thermal Properties of Nanoscale Lead-Free Solders on Multisegmented Metal NanowiresThe Journal of Physical Chemistry C, 2009
- Screen printing of silver nanoparticle suspension for metal interconnectsKorean Journal of Chemical Engineering, 2008
- Tantalum nitride thin film resistors by low temperature reactive sputtering for plastic electronicsSurface and Interface Analysis, 2008
- On‐Substrate Synthesis of Molecular Conductor Films and CircuitsAdvanced Materials, 2007
- Direct Ink‐Jet Printing of Ag–Cu Nanoparticle and Ag‐Precursor Based Electrodes for OFET ApplicationsAdvanced Functional Materials, 2007
- Direct writing of copper conductive patterns by ink-jet printingThin Solid Films, 2007
- PROGRESS IN PLASTIC ELECTRONICS DEVICESAnnual Review of Materials Research, 2006
- Highly Conductive Ink Jet Printed Films of Nanosilver Particles for Printable ElectronicsElectrochemical and Solid-State Letters, 2005
- A microbeam RBS analysis of low temperature direct-write inkjet deposited copperNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2002
- “Synthetic metals”: a novel role for organic polymersCurrent Applied Physics, 2001