Parameters Influencing Performance of Elastomeric Bearings at Low Temperatures
Authors:
- 1 August 2002
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 128 (8) , 986-994
Abstract
Experimental research was conducted to investigate the performance of elastomeric bridge bearings at low temperatures. Full-size natural rubber and neoprene bearings were tested by specially designed test setups inside a walk-in-type environmental chamber. Steel laminated bearings were ordered with two specified shear modulus, 0.69 and 1.08 MPa. Tests were conducted at 23, −10, −20, and −30°C for a period of 21 days. The effect of cyclic compression, cyclic shear, rate of loading, type of elastomer compound, temperature history, creep, and slip coefficient on the performance was investigated. Approximately 500 shear stiffness tests were performed. Results indicated that the increase in shear stiffness at low temperature is a function of elastomer compound, temperature, and time. In addition, rate of loading, amplitude of strain, coefficient of friction, and temperature history were identified as important parameters that influence the bearing performance. Creep behavior at low temperature was significantl...Keywords
This publication has 2 references indexed in Scilit:
- Evaluation of Elastomeric Bearing Performance at Low TemperaturesJournal of Structural Engineering, 2002
- First and Second Order Transitions in NeopreneRubber Chemistry and Technology, 1961