The effects of shear affected zone on edge crack sensitivity in dual-phase steels
Authors:
Open Access
- 1 November 2019
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 651 (1) , 012073
Abstract
Dual phase steels offer good combination of mechanical properties which is attractive for automotive industry. However, some challenges still remain and suppress using them widely. One of these challenges is the formation of premature cracks at shear-cut edges during the subsequent forming processes, which cannot be predicted by the conventional finite element methods. Therefore, the present study aims to propose a numerical tool to predict edge cracks in DP steel components. In this regard, the hole expansion method was applied as an edge crack detection technique on DP1000 steel sheets. To elaborate the study, parallel finite element simulations were performed as well. The simulation method considered the whole hole piercing process and the following hole expansion test as a one-stroke two-step strategy. The hole piercing process was applied in the first step on the sheet and a hole was cut. The results reveal that this process forms some surface irregularities and applies a special amount of damage at the cut edge, which both could have effects on the edge crack sensitivity. To study these effects, the subsequent hole expansion test was simulated on the manufactured hole. Thus, the effects of both surface irregularities and residual damage from hole piercing process were investigated in different case studies with all possible combinations of these effects. This strategy provides possibilities to numerically separate effects of surface quality and residual damage. The contribution shows on the one hand the experimental investigations and on the other hand deals with the numerical influence analyses.Keywords
This publication has 10 references indexed in Scilit:
- Trimming and sheared edge stretchability of automotive 6xxx aluminum alloysJournal of Materials Processing Technology, 2019
- Numerical quantification of damage accumulation resulting from blanking in multi-phase steelIOP Conference Series: Materials Science and Engineering, 2018
- Extension of the modified Bai‐Wierzbicki model for predicting ductile fracture under complex loading conditionsFatigue & Fracture of Engineering Materials & Structures, 2017
- Edge Fracture Prediction Using Uncoupled Ductile Fracture Models for DP780 SheetJournal of Failure Analysis and Prevention, 2017
- An integrated finite element-based simulation framework: From hole piercing to hole expansionFinite Elements in Analysis and Design, 2016
- FE simulation of edge fracture considering pre-damage from blanking processInternational Journal of Solids and Structures, 2015
- Predicting Failure during Sheared Edge Stretching Using a Damage-Based Model for the Shear-Affected ZoneSAE International Journal of Materials and Manufacturing, 2013
- Characterization of mechanically sheared edges of dual phase steelsJournal of Materials Processing Technology, 2012
- Finite element analysis of the effect of blanked edge quality upon stretch flanging of AHSSCIRP Annals, 2010
- On the ductile enlargement of voids in triaxial stress fields∗Journal of the Mechanics and Physics of Solids, 1969