Dye‐Sensitized Solar Cells with Efficiency over 36% under Ambient Light Achieved by Cosensitized Tandem Structure
Authors:
Abstract
The cosensitization process is an effective way to improve the performance of dye‐sensitized solar cells (DSSCs), especially for tandem cells that employ the complementary light harvest ranges of different dyes. Herein, various cosensitized DSSCs are prepared using D35, XY1b, and Y123 dyes and employed to construct cobalt tandem DSSCs. First, the performance of single cells with and without scattering layers is studied. The results show that the cosensitized cells using D35 + XY1b and XY1b + Y123 dyes have higher power conversion efficiency (PCE) than the others, attributed to their longer light absorption wavelength and higher charge recombination resistance. Furthermore, the XY1b + Y123 cell has significantly higher open circuit voltage (Voc) but slightly lower current density (Jsc) than those of the D35 + XY1b cell. The cosensitized systems are further utilized to prepare tandem cells. Photoelectrodes without and with scattering layers are used as top and bottom cells, respectively. It shows that by using D35 + XY1b (higher Jsc) and XY1b + Y123 (higher Voc) as sensitizers of top and bottom cells, respectively, a PCE as high as 36.27% can be achieved under fluorescent lighting. The cells using these dyes have high long‐term stability at room temperature.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (MOST 108-2221-E-006 -158 -MY3)
This publication has 60 references indexed in Scilit:
- Dye-sensitized solar cells for efficient power generation under ambient lightingNature Photonics, 2017
- Porphyrin Sensitizers with Donor Structural Engineering for Superior Performance Dye‐Sensitized Solar Cells and Tandem Solar Cells for Water Splitting ApplicationsAdvanced Energy Materials, 2016
- Molecular Engineering of Potent Sensitizers for Very Efficient Light Harvesting in Thin-Film Solid-State Dye-Sensitized Solar CellsJournal of the American Chemical Society, 2016
- Characterization of photovoltaic devices for indoor light harvesting and customization of flexible dye solar cells to deliver superior efficiency under artificial lightingApplied Energy, 2015
- Dye-sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizersNature Chemistry, 2014
- Novel three-layer TiO2 nanoparticle stacking architecture for efficient dye-sensitized solar cellsOrganic Electronics, 2013
- Broadband light confinement using a hierarchically structured TiO2 multi-layer for dye-sensitized solar cellsJournal of Materials Chemistry A, 2013
- Porphyrin-Sensitized Solar Cells with Cobalt (II/III)–Based Redox Electrolyte Exceed 12 Percent EfficiencyScience, 2011
- Highly Efficient Light-Harvesting Ruthenium Sensitizer for Thin-Film Dye-Sensitized Solar CellsACS Nano, 2009
- A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 filmsNature, 1991