Soft-Switched Dual-Input DC–DC Converter Combining a Boost-Half-Bridge Cell and a Voltage-Fed Full-Bridge Cell
- 21 February 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 28 (11) , 4897-4902
Abstract
This letter presents a new zero-voltage-switching (ZVS) isolated dc–dc converter which combines a boost half-bridge (BHB) cell and a full-bridge (FB) cell, so that two different type of power sources, i.e., both current fed and voltage fed, can be coupled effectively by the proposed converter for various applications, such as fuel cell and supercapacitor hybrid energy system. By fully using two high- frequency transformers and a shared leg of switches, number of the power devices and associated gate driver circuits can be reduced. With phase-shift control, the converter can achieve ZVS turn-on of active switches and zero-current switching (ZCS) turn-off of diodes. In this letter, derivation, analysis, and design of the proposed converter are presented. Finally, a 25–50 V input, 300–400 V output prototype with a 600 W nominal power rating is built up and tested to demonstrate the effectiveness of the proposed converter topology.Keywords
This publication has 14 references indexed in Scilit:
- Dynamic Properties of Current-Fed Quadratic Full-Bridge Buck Converter for Distributed Photovoltaic MPP-Tracking SystemsIEEE Transactions on Power Electronics, 2012
- Grid-Connected Boost-Half-Bridge Photovoltaic Microinverter System Using Repetitive Current Control and Maximum Power Point TrackingIEEE Transactions on Power Electronics, 2012
- Analysis and Design of a Bidirectional Isolated DC–DC Converter for Fuel Cells and Supercapacitors Hybrid SystemIEEE Transactions on Power Electronics, 2011
- Optimal Design of a Push-Pull-Forward Half-Bridge (PPFHB) Bidirectional DC–DC Converter With Variable Input VoltageIEEE Transactions on Industrial Electronics, 2011
- Efficiency-Optimized High-Current Dual Active Bridge Converter for Automotive ApplicationsIEEE Transactions on Industrial Electronics, 2011
- Multiphase DC–DC Converters Using a Boost-Half-Bridge Cell for High-Voltage and High-Power ApplicationsIEEE Transactions on Power Electronics, 2010
- Analysis, Design, and Control of Bidirectional Cascoded Configuration for a Fuel Cell Hybrid Power SystemIEEE Transactions on Power Electronics, 2009
- Energy Management in a Fuel Cell/Supercapacitor Multisource/Multiload Electrical Hybrid SystemIEEE Transactions on Power Electronics, 2009
- Transformer-Coupled Multiport ZVS Bidirectional DC–DC Converter With Wide Input RangeIEEE Transactions on Power Electronics, 2008
- A New ZVS Bidirectional DC–DC Converter for Fuel Cell and Battery ApplicationIEEE Transactions on Power Electronics, 2004