Microscopic mechanism of subgrade vibration compaction based on discrete element method
Authors:
Open Access
- 1 January 2023
- journal article
- research article
- Published by American Institute of Mathematical Sciences (AIMS) in Electronic Research Archive
- Vol. 31 (11) , 7061-7077
Abstract
The discrete element is an important tool for vibration compaction simulation from the microscopic viewpoint. The irregular particle model was established by the disc filling method, and the linear contact model with anti-rolling was selected to reflect the contact characteristics between the particles, so as to establish the simulation model of subgrade vibratory compaction. Based on this model, the stress characteristics of the area below the center of the vibrating wheel and the surface area of the soil were studied, and the principle of vibratory compaction was discussed. The results show that the distribution of vertical stresses below the center of drum basically presents a decreasing trend in the depth range during vibration, with the stress amplitude of the lower structure increasing and the stress magnitude of the upper structure decreasing. The distribution of horizontal stresses in the area below the center of the vibrating wheel is similar to the stress distribution in the splitting test. The soil at the surface has an obvious pushing and squeezing effect, and the transmission distance of horizontal stresses is larger than that of vertical stresses. The soil at the surface is pushed and the horizontal stresses are transmitted at a greater distance than the vertical stresses, which, together with a certain degree of shear effect, causes a certain uplift deformation of the soil around the vibrating wheel. In general, the vibration compaction process is relatively consistent with the theory of repeated loading and the theory of alternating shear strain.Keywords
This publication has 9 references indexed in Scilit:
- Statistical analysis of wave localization and delocalization in one-dimensional randomly disordered phononic crystals with finite cellsWaves in Random and Complex Media, 2022
- Discrete element analysis of structural characteristics of stepped reinforced soil retaining wallGeomatics, Natural Hazards and Risk, 2020
- Calibration of linear contact stiffnesses in discrete element models using a hybrid analytical-computational frameworkPowder Technology, 2019
- Convergence and stability analysis of the deformable discrete element methodInternational Journal for Numerical Methods in Engineering, 2018
- Modeling the direct shear test of a coarse sand using the 3D Discrete Element Method with a rolling friction modelComputers and Geotechnics, 2015
- Numerical study of the dynamic compaction of gravel soil ground using the discrete element methodGranular Matter, 2014
- Discrete element simulation of ballast and gravel under special consideration of grain-shape, grain-size and relative densityGranular Matter, 2010
- Exploring the macro- and micro-scale response of an idealised granular material in the direct shear apparatusGéotechnique, 2006
- Discrete Element Modeling to Predict the Modulus of Asphalt Concrete MixturesJournal of Materials in Civil Engineering, 2004