Strength improvement in biopolymer-treated clay: decoupling the role of densification and bonding
- 1 January 2026
- journal article
- research article
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 63, 1-21
Abstract
This study presents a controlled experimental framework to isolate intrinsic biopolymer bonding from strength gains induced by densification (void ratio reduction) in stabilized high-plasticity clay. Xanthan gum (XG) and κ-carrageenan (CG) were evaluated using two preparation methods: Method A, in which the biopolymer replaces an equivalent soil mass to minimize densification, and Method B, in which the biopolymer is added to the original soil mass. Unconfined compressive strength (UCS), secant stiffness ( E 50 ), energy absorption capacity (EAC), curing behavior, microstructure, cost-effectiveness, and binder-related carbon footprint were systematically assessed. Results show that densification accounts for a substantial portion of the strength gains often attributed to biopolymer stabilization. The maximum strength improvement ratio increased from 41.3% (8% CG, Method A) to 163.6% (8% XG, Method B). At 28 days and 8% dosage, UCS increased from 639–647 kPa (Method A) to 1255–1305 kPa (Method B), confirming the dominant role of densification. Under Method A, E 50 generally increased with curing but decreased with dosage, while EAC rose by 269%–511% (XG) and 159%–235% (CG) relative to untreated soil. XG exhibited stable mechanical performance under natural curing, whereas CG showed moisture-sensitive degradation. Scanning electron microscopy analysis revealed coating, bridging, matrix formation, and dehydration-driven structural evolution. Although cement remains more cost-effective and has a lower binder-related carbon footprint within the adopted boundaries, the proposed framework enables a more objective evaluation of biopolymer stabilization and supports the informed selection of sustainable ground improvement strategies.Keywords
Funding Information
- Süleyman Demirel University Scientific Research Projects Coordination Unit (FBG-2024-9575)
This publication has 61 references indexed in Scilit:
- Mechanisms of compacted soil deterioration in biopolymer-treated sands under cyclic wetting and dryingBulletin of Engineering Geology and the Environment, 2026
- Hydraulic erosion mitigation in sandy soil using cation-crosslinked gelation biopolymerActa Geotechnica, 2025
- Consolidation and swelling behavior of kaolinite clay containing xanthan gum biopolymerActa Geotechnica, 2023
- Sustainable biopolymer soil stabilisation: the effect of microscale chemical characteristics on macroscale mechanical propertiesActa Geotechnica, 2022
- Strengthening potential of xanthan gum biopolymer in stabilizing weak subgrade soilClean Technologies and Environmental Policy, 2022
- Use of xanthan and guar gums in soil strengtheningClean Technologies and Environmental Policy, 2018
- Shear strength behavior and parameters of microbial gellan gum-treated soils: from sand to clayActa Geotechnica, 2018
- Evaluating the physical characteristics of biopolymer/soil mixturesArabian Journal of Geosciences, 2016
- Effects of alkaline-activated fly ash and Portland cement on soft soil stabilisationActa Geotechnica, 2013
- Applications of microorganisms to geotechnical engineering for bioclogging and biocementation of soil in situReviews in Environmental Science and Bio/Technology, 2008