An Improved Height Difference Based Model of Height Profile for Drop-on-Demand 3D Printing With UV Curable Ink
Authors:
- Yumeng WuYWYumeng Wu
- George ChiuGCGeorge Chiu
- 25 May 2021
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 491-495
Abstract
This paper proposes an improved height profile model for drop-on-demand 3D printing with UV curable ink. It is extended from a previously validated model and computes height profile indirectly from volume and area propagation to ensure volume conservation. To accommodate multi-layer printing of 2D patterns, volume change and area change within a region of interest are modeled as piecewise functions of height differences before and after drop deposition. Model coefficients are experimentally obtained and validated with bootstrapping of experimental samples. Six different drop patterns are experimentally validated. The RMS height profile errors for multi-layer 2D patterns from the proposed model are consistently smaller than existing models from literature and are on the same level as multi-layer 1D patterns reported in our previous publication.Keywords
All Related Versions
This publication has 18 references indexed in Scilit:
- Inkjet and inkjet-based 3D printing: connecting fluid properties and printing performanceRapid Prototyping Journal, 2017
- Numerical simulation of droplet impact and evaporation on a porous surfaceInternational Communications in Heat and Mass Transfer, 2017
- Preparing industry for additive manufacturing and its applications: Summary & recommendations from a National Science Foundation workshopAdditive Manufacturing, 2017
- Additive manufacturing and sustainability: an exploratory study of the advantages and challengesJournal of Cleaner Production, 2016
- Design for Additive Manufacturing of Cellular StructuresComputer-Aided Design and Applications, 2008
- Computational analysis of drop-on-demand drop formationPhysics of Fluids, 2007
- Inkjet Printing of Functional MaterialsMRS Bulletin, 2003
- Experimental and computational study of liquid drop over flat and spherical surfacesCatalysis Today, 2003
- Applicatons of Ink-Jet Printing Technology to BioMEMS and Microfluidic SystemsSLAS Technology, 2002
- Distributed-Parameter Modeling for Geometry Control of Manufacturing Processes With Material DepositionJournal of Dynamic Systems, Measurement, and Control, 1998