The Influence of Tool Path Strategies on Cutting Force and Surface Texture during Ball End Milling of Low Curvature Convex Surfaces
Open Access
- 20 February 2014
- journal article
- research article
- Published by Wiley in The Scientific World Journal
- Vol. 2014, 1-14
Abstract
Advancement in machining technology of curved surfaces for various engineering applications is increasing. Various methodologies and computer tools have been developed by the manufacturers to improve efficiency of freeform surface machining. Selection of the right sets of cutter path strategies and appropriate cutting conditions is extremely important in ensuring high productivity rate, meeting the better quality level, and lower cutting forces. In this paper, cutting force as a new decision criterion for the best selection of tool paths on convex surfaces is presented. Therefore, this work aims at studying and analyzing different finishing strategies to assess their influence on surface texture, cutting forces, and machining time. Design and analysis of experiments are performed by means of Taguchi technique and analysis of variance. In addition, the significant parameters affecting the cutting force in each strategy are introduced. Machining strategies employed include raster, 3D-offset, radial, and spiral. The cutting parameters were feed rate, cutting speed, and step over. The experiments were carried out on low curvature convex surfaces of stainless steel 1.4903. The conclusion is that radial strategy provokes the best surface texture and the lowest cutting forces and spiral strategy signifies the worst surface texture and the highest cutting forces.Keywords
This publication has 17 references indexed in Scilit:
- Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi methodMeasurement, 2011
- Assessment of sculptured surface milling strategies using design of experimentsThe International Journal of Advanced Manufacturing Technology, 2004
- A study of the effects of cutter path strategies and orientations in millingJournal of Materials Processing Technology, 2004
- Surface topography analysis in high speed finish milling inclined hardened steelPrecision Engineering, 2004
- The influence of finishing milling strategies on texture, roughness and dimensional deviations on the machining of complex surfacesJournal of Materials Processing Technology, 2003
- Prediction of cutting forces and machining error in ball end milling of curved surfaces -II experimental verificationPrecision Engineering, 2002
- Experimental Evaluation of Cutter Orientation When Ball Nose End Milling Inconel 718™Journal of Manufacturing Processes, 2000
- Cutting force prediction of sculptured surface ball-end milling using Z-mapInternational Journal of Machine Tools and Manufacture, 2000
- Feed-Rate Optimization of Ball End Milling Considering Local Shape FeaturesCIRP Annals, 1997
- A general mathematical model for optimizing NC tool path for face milling of flat convex polygonal surfacesInternational Journal of Production Research, 1990