Research on Pitting Corrosion of Microalloyed High-Strength Steel Bars
Authors:
- 21 March 2024
- journal article
- research article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 80 (6) , 568-578
Abstract
In this study, a series of soaking experiments were conducted in a simulated marine environment solution to explore the pitting corrosion behavior induced by four types of inclusions in microalloyed steel bars: Al2O3, MnS, Al2O3-(Ti, V, Nb)N, and Al2O3-MnS-(Ti, V, Nb)N. In the early stage of corrosion, due to the high-density lattice distortion zone around the MnS and Al2O3 inclusions, along with the fact that these inclusions are not closely connected with the steel matrix, microcracks can occur leading to the initial corrosion of MnS in the Cl− environment. The corrosion rate of Al2O3 is the second highest after MnS, and clusters of Al2O3 can further accelerate the corrosion rate. The lattice distortion density around (Ti, V, Nb)N precipitates is significantly lower than that around MnS and Al2O3 inclusions. Additionally, (Ti, V, Nb)N is closely connected with the steel matrix without any microvoids. Therefore, (Ti, V, Nb)N is not sufficient to induce pitting corrosion of the matrix. The trend of pitting corrosion induced by the four types of inclusions, Al2O3, MnS, Al2O3-(Ti, V, Nb)N, and Al2O3-MnS-(Ti, V, Nb)N, is as follows: MnS > Al2O3 > Al2O3-MnS-(Ti, V, Nb)N > Al2O3-(Ti, V, Nb)N.Keywords
This publication has 31 references indexed in Scilit:
- Effect of surface Volta potential of Cr‐containing steel on uniform corrosion and pitting corrosionMaterials and Corrosion, 2021
- Effect of nonmetallic inclusions on localized corrosion of spring steelInternational Journal of Minerals, Metallurgy and Materials, 2021
- Towards a better understanding of localised corrosion induced by typical non-metallic inclusions in low-alloy steelsCorrosion Science, 2021
- Initial microzonal corrosion mechanism of inclusions associated with the precipitated (Ti, Nb)N phase of Sb-containing weathering steelCorrosion Science, 2020
- Influence of inclusions on initiation of pitting corrosion and stress corrosion cracking of X70 steel in near-neutral pH environmentCorrosion Science, 2019
- Effects of aging time on intergranular and pitting corrosion behavior of Cu-bearing 304L stainless steel in comparison with 304L stainless steelCorrosion Science, 2016
- Comparison of barrier properties for a superhydrophobic epoxy coating under different simulated corrosion environmentsCorrosion Science, 2016
- Quasi-in-situ ex-polarized TEM observation on dissolution of MnS inclusions and metastable pitting of austenitic stainless steelCorrosion Science, 2015
- Growth mechanism, distribution characteristics and reinforcing behavior of (Ti, Nb)C particle in laser cladded Fe-based composite coatingApplied Surface Science, 2014
- The influence of inhibitors molecular structure and steel microstructure on corrosion layers in CO2 corrosionApplied Surface Science, 2004