Analytical–experimental approach for accurate depth profile evaluation of diffusion zone in plasma nitrided iron
Authors:
- 1 May 2011
- journal article
- research article
- Published by SAGE Publications in Surface Engineering
- Vol. 27 (4) , 259-265
Abstract
Nitrogen depth profile of diffusion zone in plasma nitrided pure iron was analytically calculated and experimentally measured. Nitrogen concentration equation was obtained versus nitriding temperature, time and diffusion distance. Plasma nitriding was carried out on pure iron substrate at 550°C in an atmosphere of 75H2–25N2. Nitrogen concentration depth profile in compound layer was characterised by glow discharge optical emission spectroscopy (GDOES) and for detection of nitrogen within the diffusion zone, secondary ion mass spectroscopy (SIMS) technique was employed. Nitrogen diffusion depths were measured accurately by optical and scanning electron microscopy as well as SIMS technique at different nitriding times. Experimental results indicated good agreement with calculated diffusion depths for various nitriding cycles. The extent of nitrogen diffusion depth in alpha zone, detected in this work for 10 h plasma nitriding at 550°C, was in excess of 2000 μm; such values have not been reported in previous investigations that conventionally used EDS, GDS, XPS or EPMA technique.Keywords
This publication has 23 references indexed in Scilit:
- Calculation of nitrogen depth profiles in nitrided multi-component ferritic steelSurface and Coatings Technology, 2006
- Characterization of plasma-nitrided iron by XRD, SEM and XPSSurface and Coatings Technology, 2004
- Numerical simulation of nitrided layer growth and nitrogen distribution in ε-Fe2-3N, γ'-Fe4N and α-Fe during pulse plasma nitriding of pure ironModelling and Simulation in Materials Science and Engineering, 2000
- Microstructural and compositional evolution of compound layers during gaseous nitrocarburizingMetallurgical and Materials Transactions A, 2000
- Characterization of surface modified α-iron by nitrogen plasma immersion ion implantation: a microstructural studyMaterials Science and Engineering: A, 1999
- A numerical model of plasma nitriding of low alloy steelsMaterials Science and Engineering: A, 1997
- Thermodynamics, kinetics, and process control of nitridingSurface Engineering, 1997
- Theoretical treatment of nitriding and nitrocarburizing of ironMetallurgical and Materials Transactions A, 1996
- STRUCTURAL CHARACTERISATION OF NOVEL Ti-Cu INTERMETALLIC COATINGSSurface Engineering, 1996
- Layer-growth kinetics on gaseous nitriding of pure iron: Evaluation of diffusion coefficients for nitrogen in iron nitridesMetallurgical and Materials Transactions A, 1995