Friction Stir Welding Parameters Development of AA6061-T6 Extruded Alloy Using a Bobbin Tool
Open Access
- 9 October 2023
- conference paper
- Published by MDPI AG in Engineering Proceedings
- Vol. 43 (1) , 50
Abstract
Bobbin tool friction stir welding (BT-FSW), or self-reacting tool friction stir welding (SR-FSW), refers to a solid-state welding process which that uses two opposing rotating shoulders (top and lower of the workpiece) connected with a fully penetrated pin. In fact, the bottom shoulder in the BT-FSW design replaced the backing plate used in the conventional tool friction stir welding (CT-FSW) to promote symmetrical solid-state joints. Compared to CT-FSW, the BT-FSW process has many advantages over the use of a conventional tool such as the welded structure is symmetric in thickness, low distortion of weld joint can be obtained, the elimination of root for welds, a backing plate is not required, and high force is not required for fixing the weld plates and possibility welding a closed or a hollow section (U and H shapes). The welding parameters of BT-FSW, such as tool pin profile, rotational speed, welding speed, and axial force, have a considerable effect on the microstructure and the mechanical properties of the resulting assembly. In the current study, two extrusions of aluminum alloy 6061-T6 with 8 mm were joined by the BT-FSW technique with a tool pin with threads and eight different welding parameters (tool rotation speed and welding speed). The maximum value of tensile strength was achieved using optimum welding conditions of a tool rotation speed of 850 rpm/min and a welding speed of 650 mm/min. The study also investigated the joint efficiency of the friction stir welded joint, defects at the weld zone, and fatigue life of BT-FSW samples at the optimized level.Keywords
Funding Information
- MITACS and AluQuébec. (IT35750)
This publication has 10 references indexed in Scilit:
- Study on the relationship between welding force and defects in bobbin tool friction stir weldingJournal of Manufacturing Processes, 2022
- Fatigue analysis of the friction stir welded AA6061-T6 aluminum alloyMaterials Research Express, 2020
- Fatigue of Friction Stir Welded Aluminum Alloy Joints: A ReviewApplied Sciences, 2018
- Bobbin tool friction stir welding: a reviewScience and Technology of Welding and Joining, 2018
- Process optimization in the self-reacting friction stir welding of aluminum 6061-T6International Journal of Material Forming, 2017
- Bobbin and conventional friction stir welding of thick extruded AA6005-T6 profilesMaterials & Design, 2016
- Through thickness property variations in friction stir welded AA6061 joint fatigued in very high cycle fatigue regimeInternational Journal of Fatigue, 2016
- Temperature measurement and control of bobbin tool friction stir weldingThe International Journal of Advanced Manufacturing Technology, 2015
- Influences of post-weld heat treatment on tensile properties of friction stir-welded AA6061 aluminum alloy jointsMaterials Characterization, 2008
- Tensile properties and fracture locations of friction-stir welded joints of 6061-T6 aluminum alloyJournal of Materials Science Letters, 2003