Enhancing Disinfection Efficiency of Wastewater Treatment Plant Effluent: The Role of ZnO Nanoparticles in Ultrasonic and UV-C Processes
- 10 November 2023
- journal article
- research article
- Published by World Scientific Pub Co Pte Ltd in Nano
- Vol. 19 (02)
Abstract
Ultrasonic (US) and UV-C disinfection technologies have been successfully used in wastewater treatment plants (WWTPs) for disinfection purposes. The US technology is typically used as a pre-treatment step to break down larger particles and make them more susceptible to disinfection. The UV-C technology is commonly used as a final disinfection step in many WWTPs. The study aimed to assess the potential of using Zinc Oxide (ZnO) Nanoparticles (NPs) to improve the effectiveness of UV-C and US disinfection methods in treating wastewater effluent, offering a more comprehensive solution to wastewater treatment. In this experimental study, a Laboratory US Bath (40[ ]kHz) and a UV-C lamp (16[ ]W) were used. In order to investigate the effectiveness of ZnO NPs in the reduction of microbial load, 5[ ]mg/L of ZnO NPs was added to the effluent samples. Then, samples were examined for Total Coliform (TC) and Fecal Coliform (FC) reduction by the standard MPN/100[ ]mL test. The Chick‘s law was used to calculate the efficiency of microbial load. The relationship between variables was determined by regression analysis using Excel and SPSS-ver 21 software. In this study, the samples were examined in three groups: Samples that were only exposed to sonication or received UV-C radiation with Turbidity of 18 NTU (Group A) and Turbidity of 5 NTU (Group B), and Samples that received 5 mg/L of ZnO NPs (Group C). By increasing the time from 0.5 min to 10 min in the presence of UV-C, the amount of microbial population decreased, and 2 min was considered the optimal time. The maximum removal efficiencies by US for TC were 74.07,77.7, 85.1% (40∘C) and 92.5,100, and 100% (60∘C) in group A (in 30 min sonication), 85.7, 85.7, 100% (40∘C), respectively, and were 100% in other groups (B and C), respectively. The maximum removal efficiencies by US for FC were 76.4%, 88.2%, and 100% (40∘C) and 88.2%, 100%, and 100% (60∘C) in group A (in 30 min sonication), respectively, and were 100% in other groups (B and C). In this study, an important increase in the disinfection ability of ZnO NPs has been observed in the presence of US and UV-C. So, the ZnO NPs/UV-C and ZnO NPs/US processes are valuable alternatives to conventional disinfection processes by over 90% improvement of disinfection efficiency.Keywords
Funding Information
- The Deputy of Research and Technology of Mazandaran University ofMedical Sciences (IR.MAZUMS.REC.1401.224)
This publication has 45 references indexed in Scilit:
- Green synthesis of zinc oxide nanoparticles using lychee peel and its application in anti-bacterial properties and CR dye removal from wastewaterChemosphere, 2023
- Realization of UV-C absorption in ZnO nanostructures using fluorine and silver co-dopingColloid and Interface Science Communications, 2022
- Strategies for mitigating chlorinated disinfection byproducts in wastewater treatment plantsChemosphere, 2022
- Low-frequency ultrasound increase effectiveness of silver nanoparticles in a purulent wound modelBiomedical Engineering Letters, 2020
- Application of Nanoparticles for Disinfection and Microbial Control of Water and Wastewater2019
- Preparation and antibacterial activity of chitosan-based nanocomposites containing bentonite-supported silver and zinc oxide nanoparticles for water disinfectionApplied Clay Science, 2015
- Drinking Water Disinfection By-products2011
- Principle and applications of microbubble and nanobubble technology for water treatmentChemosphere, 2011
- Kinetics and mechanism of advanced oxidation processes (AOPs) in degradation of ciprofloxacin in waterApplied Catalysis B: Environment and Energy, 2010
- Energy-efficient sludge sonication: Power and sludge characteristicsBioresource Technology, 2008