Accurate method for synthesis of shaped‐beam non‐uniform reflectarray antenna
Authors:
Open Access
- 1 December 2013
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 7 (15) , 1247-1253
Abstract
This study presents an accurate method to synthesise a shaped‐beam flat reflectarray (RA) antenna based on the phase synthesis of its equivalent aperture. For this purpose particle swarm optimisation is used to determine the optimal phase distribution on the reflective surface of the antenna. Furthermore, by dividing the equivalent aperture of the antenna into small parts and by appropriate approximation of the induced current in each part, the radiation fields have been evaluated via the sum of the simple integrals. In this approach the relation of the amplitude and phase of the reflection co‐efficient of the RA elements with the radiation fields of the antenna can be obtained. Therefore the effect of the RA elements can directly be considered in the optimisation process. Also, in the proposed method the effects of the feed antenna including the angle, polarisation, amplitude and phase of the radiated fields from the feed are fully considered in the synthesis procedure. To verify the synthesis method a RA with flat reflective surface has been designed and manufactured that shows a good agreement with the simulation results obtained from commercial full‐wave electromagnetic software, CST Microwave Studio.Keywords
This publication has 17 references indexed in Scilit:
- Derivation and Validation of the Basic Design Equations for Symmetric Sub-ReflectarraysIEEE Transactions on Antennas and Propagation, 2012
- Design and Experiment of a Single-Feed Quad-Beam Reflectarray AntennaIEEE Transactions on Antennas and Propagation, 2011
- A Transmit-Receive Reflectarray Antenna for Direct Broadcast Satellite ApplicationsIEEE Transactions on Antennas and Propagation, 2011
- Single‐layer microstrip reflectarray with double elliptical ring elements for bandwidth enhancementMicrowave and Optical Technology Letters, 2011
- Array Pattern Synthesis Using Digital Phase Control by Quantized Particle Swarm OptimizationIEEE Transactions on Antennas and Propagation, 2010
- Three-Layer Printed Reflectarrays for Contoured Beam Space ApplicationsIEEE Transactions on Antennas and Propagation, 2004
- Concentric split ring element for dual frequency reflectarray antennasElectronics Letters, 2003
- Broadband design of three-layer printed reflectarraysIEEE Transactions on Antennas and Propagation, 2003
- A Ka-band microstrip reflectarray with elements having variable rotation anglesIEEE Transactions on Antennas and Propagation, 1998
- Analysis of a reflectarray antenna using microstrip patches of variable sizeElectronics Letters, 1993