A single-crystal diamond X-ray pixel detector with embedded graphitic electrodes
Authors:
Open Access
- 31 March 2020
- journal article
- research article
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 27 (3) , 599-607
Abstract
The first experimental results from a new transmissive diagnostic instrument for synchrotron X-ray beamlines are presented. The instrument utilizes a single-crystal chemical-vapour-deposition diamond plate as the detector material, with graphitic wires embedded within the bulk diamond acting as electrodes. The resulting instrument is an all-carbon transmissive X-ray imaging detector. Within the instrument's transmissive aperture there is no surface metallization that could absorb X-rays, and no surface structures that could be damaged by exposure to synchrotron X-ray beams. The graphitic electrodes are fabricated in situ within the bulk diamond using a laser-writing technique. Two separate arrays of parallel graphitic wires are fabricated, running parallel to the diamond surface and perpendicular to each other, at two different depths within the diamond. One array of wires has a modulated bias voltage applied; the perpendicular array is a series of readout electrodes. X-rays passing through the detector generate charge carriers within the bulk diamond through photoionization, and these charge carriers travel to the nearest readout electrode under the influence of the modulated electrical bias. Each of the crossing points between perpendicular wires acts as an individual pixel. The simultaneous read-out of all pixels is achieved using a lock-in technique. The parallel wires within each array are separated by 50 µm, determining the pixel pitch. Readout is obtained at 100 Hz, and the resolution of the X-ray beam position measurement is 600 nm for a 180 µm size beam.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/R004803/01)
- Engineering and Physical Sciences Research Council (EP/T001062/1, EP/M013243/1, EP/L015315/10)
This publication has 20 references indexed in Scilit:
- A novel detector with graphitic electrodes in CVD diamondDiamond and Related Materials, 2013
- Development of diamond-based X-ray detection for high-flux beamline diagnosticsJournal of Synchrotron Radiation, 2010
- I18 – the microfocus spectroscopy beamline at the Diamond Light SourceJournal of Synchrotron Radiation, 2009
- Single crystal CVD diamond as an X-ray beam monitorDiamond and Related Materials, 2007
- Effect of dislocations on charge carrier mobility–lifetime product in synthetic single crystal diamondApplied Physics Letters, 2007
- ELNES study of carbon K-edge spectra of plasma deposited carbon filmsJournal of Materials Chemistry, 2004
- High Carrier Mobility in Single-Crystal Plasma-Deposited DiamondScience, 2002
- An automatic optical imaging system for birefringent mediaProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1996
- X-Ray Interactions: Photoabsorption, Scattering, Transmission, and Reflection at E = 50-30,000 eV, Z = 1-92Atomic Data and Nuclear Data Tables, 1993
- Investigation of carbon contamination of mirror surfaces exposed to synchrotron radiationNuclear Instruments and Methods in Physics Research, 1983