Development of Electroplated Magnesium Microstructures for Biodegradable Devices and Energy Sources
Authors:
- 13 October 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 23 (6) , 1281-1289
Abstract
This paper presents fabrication approaches for magnesium (Mg) microstructures embedded in biodegradable polymers using through-mold Mg electrodeposition and metaltransfer-molding. Biodegradable implantable electronics have garnered increasing interest from the medical community for the monitoring and treatment of transient diseases. Magnesium is a biodegradable metal with desirable properties, and the ability to micropattern Mg thick films (i.e., about >1 μm) with direct microelectromechanical systems (MEMS) integration would support the development of more sophisticated and clinically relevant biodegradable devices and microsystems. Magnesium microstructures were electroplated through micropatterned water-soluble molds in a nonaqueous electrolyte and transfer molded into a biodegradable polymer. Electroplated Mg compared favorably with commercial Mg foil based on elemental composition, crystal orientation, electrical resistivity, and corrosion behavior. Magnesium electroplated to a thickness of up to 50 μm showed a grain size of ~10 μm, and minimum feature dimensions of 100 μm in width and spacing. Completely biodegradable Mg and poly-L-lactic acid constructs were demonstrated. The application of Mg thick films toward biodegradable energy sources was explored through the fabrication and testing of biodegradable Mg/Fe batteries. The batteries exhibited a capacity and power of up to 2.85 mAh and 39 μW, respectively. Results confirmed the advantages of electrodeposited Mg microstructures for biodegradable MEMS applications.Keywords
This publication has 36 references indexed in Scilit:
- Removal of SU-8 resists using hydrogen radicals generated by tungsten hot-wire catalyzer2012
- Degradable biomaterials based on magnesium corrosionCurrent Opinion in Solid State and Materials Science, 2008
- Corrosion behavior of biomedical AZ91 magnesium alloy in simulated body fluidsJournal of Materials Research, 2007
- Anodizing Treatments for Magnesium Alloys and Their Effect on Corrosion Resistance in Various EnvironmentsAdvanced Engineering Materials, 2006
- Degradation Behaviour of Metallic Biomaterials for Degradable StentsAdvanced Materials Research, 2006
- In vivo corrosion of four magnesium alloys and the associated bone responseBiomaterials, 2005
- Magnesium dry cells2003
- Removal of SU-8 photoresist for thick film applicationsMicroelectronic Engineering, 2002
- Nonaqueous Electrochemistry of Magnesium: Applications to Energy StorageJournal of the Electrochemical Society, 1990
- Passive films on magnesium anodes in primary batteriesJournal of Applied Electrochemistry, 1988