In situ observation of melt pool evolution in ultrasonic vibration-assisted directed energy deposition
Open Access
- 17 October 2023
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-12
Abstract
The presence of defects, such as pores, in materials processed using additive manufacturing represents a challenge during the manufacturing of many engineering components. Recently, ultrasonic vibration-assisted (UV-A) directed energy deposition (DED) has been shown to reduce porosity, promote grain refinement, and enhance mechanical performance in metal components. Whereas it is evident that the formation of such microstructural features is affected by the melt pool behavior, the specific mechanisms by which ultrasonic vibration (UV) influences the melt pool remain elusive. In the present investigation, UV was applied in situ to DED of 316L stainless steel single tracks and bulk parts. For the first time, high-speed video imaging and thermal imaging were implemented in situ to quantitatively correlate the application of UV to melt pool evolution in DED. Extensive imaging data were coupled with in-depth microstructural characterization to develop a statistically robust dataset describing the observed phenomena. Our findings show that UV increases the melt pool peak temperature and dimensions, while improving the wettability of injected particles with the melt pool surface and reducing particle residence time. Near the substrate, we observe that UV results in a 92% decrease in porosity, and a 54% decrease in dendritic arm spacing. The effect of UV on the melt pool is caused by the combined mechanisms of acoustic cavitation, ultrasound absorption, and acoustic streaming. Through in situ imaging we demonstrate quantitatively that these phenomena, acting simultaneously, effectively diminish with increasing build height and size due to acoustic attenuation, consequently decreasing the positive effect of implementing UV-A DED. Thus, this research provides valuable insight into the value of in situ imaging, as well as the effects of UV on DED melt pool dynamics, the stochastic interactions between the melt pool and incoming powder particles, and the limitations of build geometry on the UV-A DED technique.Keywords
This publication has 70 references indexed in Scilit:
- In situ thermal imaging and three-dimensional finite element modeling of tungsten carbide–cobalt during laser depositionActa Materialia, 2009
- Effects of Mechanical Vibration on Cooling Rate and DAS of AC4C Aluminum Alloy Gravity Die CastingsMATERIALS TRANSACTIONS, 2009
- Formulas of AcousticsNoise Control Engineering Journal, 2009
- Microstructure Improvement in Weld Metal Using Ultrasonic VibrationsAdvanced Engineering Materials, 2007
- Characterization and Mechanism of 304 Stainless Steel Vibration WeldingMATERIALS TRANSACTIONS, 2007
- Wetting of rough surfacesJournal of Physics: Condensed Matter, 1998
- Improvement in Flowability, Oxidation Resistance and Water Wettability of Graphite Powders by TiO2 CoatingJournal of the Ceramic Society of Japan, 1996
- Measurements of cell and primary dendrite arm spacings in directionally solidified aluminium alloysActa Metallurgica, 1981
- Absorption and dispersion of ultrasound in biological tissueUltrasound in Medicine & Biology, 1975
- Ultrasonic Absorption in SolidsScience, 1960