Fracture Behavior of Modified Asphalt Mixtures Under Varying Temperature and Notch Depth: Experimental Investigation and XFEM Simulation
- 25 September 2026
- journal article
- research article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
Abstract
The combined effects of temperature, notch depth, and binder modification on asphalt fracture behavior remain insufficiently understood, particularly when experimental characterization is combined with crack‐propagation modeling. This study addresses this gap through a systematic SCB investigation of unmodified and modified asphalt mixtures at −20°C, 0°C, 20°C, and 40°C using 10‐, 20‐, and 30‐mm notch depths. Five modifiers SBS, Enprene 611, Enprene 701, crumb rubber, and Elvaloy–PPA were evaluated at different dosages, whereas XFEM models were developed in Abaqus to simulate fracture and crack propagation. Increasing temperature transformed the response from brittle to ductile, whereas deeper notches consistently reduced peak load. Binder modification generally enhanced fracture performance, with Enprene 611 and SBS providing the greatest improvements. XFEM reproduced pre‐peak and peak responses reasonably well but showed larger deviations during post‐peak softening at elevated temperatures. The findings establish the coupled influence of temperature, notch geometry, and modification on asphalt fracture and identify key limitations of the numerical post‐peak simulations.Keywords
Funding Information
- Firat University Scientific Research Projects Management Unit (MF.25.129)
- Firat University Scientific Research Projects Management Unit (ADEP.25.09)
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (123M648)
This publication has 17 references indexed in Scilit:
- Experimental and numerical study on the effect of friction between crack faces on fracture parameters of hot mix asphalt concreteCase Studies in Construction Materials, 2024
- Research of reflective crack in asphalt pavement using SCB specimen and XFEM: From laboratory test to numerical simulationConstruction and Building Materials, 2023
- Phase field approach to damage and fracture in asphalt concrete using multiscale finite element modeling of an instrumented pavement sectionEngineering Fracture Mechanics, 2022
- Extended FEM modelling of crack propagation using the semi-circular bending testConstruction and Building Materials, 2013
- Visco-elastic behavior through fractional calculus: An easier method for best fitting experimental resultsMechanics of Materials, 2011
- The fracture process zone in asphalt mixture at low temperatureEngineering Fracture Mechanics, 2010
- Using recycled taconite as alternative aggregate in asphalt pavementsConstruction and Building Materials, 2009
- A bilinear cohesive zone model tailored for fracture of asphalt concrete considering viscoelastic bulk materialEngineering Fracture Mechanics, 2006
- A finite element method for crack growth without remeshingInternational Journal for Numerical Methods in Engineering, 1999
- Elastic crack growth in finite elements with minimal remeshingInternational Journal for Numerical Methods in Engineering, 1999