Integration methods for distributed sound sources
Open Access
- 11 June 2019
- journal article
- research article
- Published by SAGE Publications in International Journal of Aeroacoustics
- Vol. 18 (4-5) , 444-469
Abstract
Most acoustic imaging methods assume the presence of point sound sources and, hence, may fail to correctly estimate the sound emissions of distributed sound sources, such as trailing-edge noise. In this contribution, three integration techniques are suggested to overcome this issue based on models considering a single point source, a line source, and several line sources, respectively. Two simulated benchmark cases featuring distributed sound sources are employed to compare the performance of these integration techniques with respect to other well-known acoustic imaging methods. The considered integration methods provide the best performance in retrieving the source levels and require short computation times. In addition, the negative effects of the presence of unwanted noise sources, such as corner sources in wind-tunnel measurements, can be eliminated. A sensitivity analysis shows that the integration technique based on a line source is robust with respect to the choice of the integration area (shape, position, and mesh fineness). This technique is applied to a trailing-edge-noise experiment in an open-jet wind tunnel featuring a NACA 0018 airfoil. The location and far-field noise emissions of the trailing-edge line source were calculated.Keywords
This publication has 35 references indexed in Scilit:
- A review of acoustic imaging methods using phased microphone arraysCEAS Aeronautical Journal, 2019
- Assessment of Noise Variability of Landing Aircraft Using Phased Microphone ArrayJournal of Aircraft, 2017
- Effect of trailing edge serration-flow misalignment on airfoil noise emissionsJournal of Sound and Vibration, 2017
- High-resolution CLEAN-SC: Theory and experimental validationInternational Journal of Aeroacoustics, 2017
- Acoustic Emissions of Semi-Permeable Trailing Edge SerrationsAcoustics Australia, 2017
- Boundary layer characterization and acoustic measurements of flow-aligned trailing edge serrationsExperiments in Fluids, 2016
- Functional Beamforming Applied to Imaging of Flyover Noise on Landing AircraftJournal of Aircraft, 2016
- A covariance fitting approach for correlated acoustic source mappingThe Journal of the Acoustical Society of America, 2010
- A fast signal subspace approach for the determination of absolute levels from phased microphone array measurementsJournal of Sound and Vibration, 2010
- CLEAN Based on Spatial Source CoherenceInternational Journal of Aeroacoustics, 2007