Shaking Maps Based on Cumulative Absolute Velocity and Arias Intensity: The Cases of the Two Strongest Earthquakes of the 2016–2017 Central Italy Seismic Sequence
Open Access
- 22 June 2018
- journal article
- research article
- Published by MDPI AG in ISPRS International Journal of Geo-Information
- Vol. 7 (7) , 244
Abstract
By referring to the two strongest earthquakes of the 2016–2017 Central Italy seismic sequence, this paper presents a procedure to make shaking maps through empirical relationships between macroseismic intensity and ground-motion parameters. Hundreds of waveforms were processed to obtain instrumental ground-motion features which could be correlated with the potential damage intensities. To take into account peak value, frequency, duration, and energy content, which all contribute to damage, cumulative absolute velocity and Arias intensity were used to quantify the features of the ground motion. Once these parameters had been calculated at the recording sites, they were interpolated through geostatistical techniques on the whole struck area. Finally, empirical relationships were used for mapping intensities, i.e., potential effects on the built environment. The results referred to both earthquake scenarios that were analyzed and were also used for assessing the influence of the spatial coverage of the instrumental network. In fact, after the first events, the Italian seismic network was subjected to the addition and thickening of sensors in the epicentral area, especially. The results obtained by models only dependent on ground-motion parameters or even on the epicentral distance were compared with the official ShakeMaps and the observed intensities for assessing their reliability. Finally, some suggestions are proposed to improve the procedure that could be used for rapidly assessing ground shaking and mapping damage potential producing useful information for non-expert audience.Keywords
This publication has 35 references indexed in Scilit:
- Probabilistic Relationships between Ground-Motion Parameters and Modified Mercalli Intensity in CaliforniaBulletin of the Seismological Society of America, 2012
- PGA and PGV Spatial Correlation Models Based on European Multievent DatasetsBulletin of the Seismological Society of America, 2011
- Conversion between Peak Ground Motion Parameters and Modified Mercalli Intensity ValuesJournal of Earthquake Engineering, 2011
- Correlation model for spatially distributed ground‐motion intensitiesEarthquake Engineering & Structural Dynamics, 2009
- Comparison of Site Classification from VS30, VS10, and HVSR in ItalyBulletin of the Seismological Society of America, 2009
- Empirical Relationships between Modified Mercalli Intensity and Engineering Ground-Motion Parameters in GreeceBulletin of the Seismological Society of America, 2008
- Relationships between Felt Intensity and Instrumental Ground Motion in the Central United States and CaliforniaBulletin of the Seismological Society of America, 2007
- Relationships between Instrumental Ground-Motion Parameters and Modified Mercalli Intensity in Eastern North AmericaBulletin of the Seismological Society of America, 2004
- Relationship between Peak Ground Acceleration, Peak Ground Velocity, and Intensity in TaiwanBulletin of the Seismological Society of America, 2003
- DURATION AND ENERGY CHARACTERISTICS OF GREEK STRONG MOTION RECORDSJournal of Earthquake Engineering, 1998