Optimal Real-Time Control of Wind Turbine During Partial Load Operation
- 23 March 2015
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 23 (6) , 2216-2226
Abstract
A wind turbine achieves its highest energy efficiency during partial load operation when it operates at the optimal tip speed ratio (TSR), thus the optimal power coefficient. In this paper, real-time controllers are developed to improve the performance of tracking the optimal TSR during partial load operation. Dynamic programming (DP) is first applied to determine the control actions that maximize wind energy capture. A DP-based real-time controller (DPRC) is then explored to overcome the high computational expense associated with DP, which limits DP to be an offline optimization algorithm. However, the DPRC is not robust against plant-model mismatch and model uncertainties. A gain-modified optimal torque controller (GMOTC) is subsequently designed as an alternative to the DPRC. The GMOTC applies internal Proportional-Integral technique to track a reference TSR, and adapts the reference TSR to the optimal TSR in real time to improve the controller robustness. The light detection and ranging technology is used to further strengthen the controller performance by providing reliable previewed wind speed measurements. Simulation results show that the DRPC generates more wind power than the standard torque controller (STC), while the GMOTC demonstrates a performance similar to that of the DRPC on wind power generation with much better robustness in the presence of modeling error. Fatigue loading on a wind turbine is another important issue that needs to be considered during control design. The analysis shows that both the DRPC and the GMOTC are comparable with the STC in generating variable torsional loads due to the torque commands.Keywords
Funding Information
- National Science Foundation-Control Systems Program CAREER through the Division of Civil, Mechanical and Manufacturing Innovation (CMMI-1056020)
This publication has 16 references indexed in Scilit:
- Comparison of Strategies for Enhancing Energy Capture and Reducing Loads Using LIDAR and Feedforward ControlIEEE Transactions on Control Systems Technology, 2013
- Stability of Wind Turbine Switching Control in an Integrated Wind Turbine and Rechargeable Battery System: A Common Quadratic Lyapunov Function ApproachJournal of Dynamic Systems, Measurement, and Control, 2013
- Nonlinear model predictive control of wind turbines using LIDARWind Energy, 2012
- Performance of a 100 kW wind turbine with a Variable Ratio GearboxRenewable Energy, 2012
- Maximum Power Tracking Control for a Wind Turbine System Including a Matrix ConverterIEEE Transactions on Energy Conversion, 2009
- Control of wind turbines: Past, present, and future2009
- Control of variable-speed wind turbines: standard and adaptive techniques for maximizing energy captureIEEE Control Systems, 2006
- Design of a maximum power tracking system for wind-energy-conversion applicationsIEEE Transactions on Industrial Electronics, 2006
- Variable speed control of wind turbines using nonlinear and adaptive algorithmsJournal of Wind Engineering and Industrial Aerodynamics, 2000
- An investigation of variable speed horizontal-axis wind turbines using direct model-reference adaptive control1999