Assessment of Preservative-Treated Wooden Poles Using Drilling-Resistance Measurements
Open Access
Abstract
An IML-Resi PD-400 drilling tool with two types of spade drill bits (IML System GmbH, Wiesloch, Germany) was used to evaluate the internal conditions of 3 m wooden poles made from Scots pine (Pinus sylvestris L.). Drilling tests were performed on poles that were industrially vacuum-pressure-impregnated with a copper-based preservative (Korasit KS-M) and untreated reference poles. Both types of poles were subject to 10.5 years of in-ground exposure. Wood moisture content (MC) was measured using a resistance-type moisture meter. MC varied between 15% and 60% in the radial and axial directions in both treated and untreated poles. A higher MC was detected in the underground, top, and outer (sapwood) parts of the poles. Typical drilling-resistance (DR) profiles of poles with internal defects were analyzed. Preservative treatment had a significant influence on wood durability in the underground part of the poles. Based on DR measurements, we found that untreated wood that was in contact with soil was severely degraded by insects and wood-destroying fungi. Conversely, treated wood generally showed no reduction in DR or feeding resistance (FR). DR profiling is a potential method for the in-situ or in vitro assessment and quality monitoring of preservative treatments and wood durability. The technological benefits of using drill bits with one major cutting edge, instead of standard drill bits with center-spiked tips and two major cutting edges, were not evident. A new graphical method was applied to present DR data and their spatial distribution in the poles. Future studies should focus on the impact of preservative treatments, thermal modification, and chemical modification on the DR and FR of wood. This may further elucidate the predictive value of DR and FR for wood properties.Keywords
Funding Information
- Deutscher Akademischer Austauschdienst (57447934)
- Ministry of Science and Higher Education of the Russian Federation (5.8394.2017/8.9; 37.13394.2019/13.2)
This publication has 33 references indexed in Scilit:
- Non-Destructive Evaluation Techniques and What They Tell Us about Wood Property VariationForests, 2019
- Effects of white rot and brown rot decay on the drilling resistance measurements in woodHolzforschung, 2018
- In situ assessment of structural timber using semi-destructive techniquesMaterials and Structures, 2013
- Application of resistograph to obtain the density and to differentiate wood speciesMateriales de Construcción, 2011
- Experimental study for non-destructive mechanical evaluation of ancient chestnut timberJournal of Civil Structural Health Monitoring, 2011
- Application of a Drill Resistance Technique for Rapid Determining Wood DensityKey Engineering Materials, 2009
- Can wood density be efficiently selected at early stage in maritime pine (Pinus pinaster Ait.)?Annals of Forest Science, 2008
- Resistographic inspection of ancient timber structures for the evaluation of mechanical characteristicsMaterials and Structures, 2001
- RESISTOGRAPH and X-Ray Density Charts of Wood. Comparative Evaluation of Drill Resistance Profiles and X-ray Density Charts of Different Wood SpeciesHolzforschung, 1996
- Bohrwiderstandsmessungen an Laubbäumen und ihre holzanatomische InterpretationEuropean Journal of Wood and Wood Products, 1994