High Performance Polycarbonate Nanocomposites Mechanically Boosted with Titanium Carbide in Material Extrusion Additive Manufacturing
Open Access
- 24 March 2022
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 12 (7) , 1068
Abstract
Herein, a polycarbonate (PC) polymer is melt extruded together with titanium carbide (TiC) nano powder for the development of advanced nanocomposite materials in material extrusion (MEX) 3D printing. Raw material for the 3D printing process was prepared in filament form with a thermomechanical extrusion process and specimens were built to be tested according to international standards. A thorough mechanical characterization testing course (tensile, flexural, impact, microhardness, and dynamic mechanical analysis-DMA) was conducted on the 3D printed specimens. The effect of the ceramic filler loading was also investigated. The nanocomposites’ thermal and stoichiometric properties were investigated with thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), energy-dispersive X-ray spectroscopy (EDS), and Raman respectively. The specimens’ 3D printing morphology, quality, and fracture mechanism were investigated with atomic force microscopy (AFM) and scanning electron microscopy (SEM) respectively. The results depicted that the addition of the filler decidedly enhances the mechanical response of the virgin polymer, without compromising properties such as its processability or its thermal stability. The highest improvement of 41.9% was reported for the 2 wt.% filler loading, making the nanocomposite suitable for applications requiring a high mechanical response in 3D printing, in which the matrix material cannot meet the design requirements.Keywords
This publication has 61 references indexed in Scilit:
- The nanomechanical behavior of a graphite nanoplatelet/polycarbonate nanocompositePolymer Testing, 2015
- Raman and Photoluminescence spectroscopy of polycarbonate matrices irradiated with different energy 28Si+ ionsVacuum, 2015
- Advances in nanocomposite materials for additive manufacturingInternational Journal of Rapid Manufacturing, 2015
- Selective laser melting additive manufacturing of TiC/Inconel 718 bulk-form nanocomposites: Densification, microstructure, and performanceJournal of Materials Research, 2014
- Influence of Building Parameters on the Dynamic Mechanical Properties of Polycarbonate Fused Deposition Modeling Parts3D Printing and Additive Manufacturing, 2014
- Rheological behavior of multiwalled carbon nanotube/polycarbonate compositesPolymer, 2002
- Temperature studies of polycarbonate using Fourier transform Raman spectroscopyPolymer Bulletin, 1996
- Application of transition metal carbides and nitrides in industrial tools1996
- Mechanical compatibilization of immiscible blendsPolymer Engineering & Science, 1984
- Mechanical Properties of Fine‐Grained Substoichiomebic Titanium CarbideJournal of the American Ceramic Society, 1983