Influence of the viscosity and melting point of converter slag on its foaming behavior
Author:
- 1 February 2014
- journal article
- Published by Allerton Press in Steel in Translation
- Vol. 44 (2) , 136-139
Abstract
To reduce the energy consumption in oxygen converters, the efficiency of injection must be maximized. That reduces the consumption of hot metal, slag-forming materials, and refractories and increases steel output. The influence of the viscosity and melting point of converter slag on its foaming behavior is investigated. By means of a polymer model, the regions of slag homogeneity are identified, and the influence of the liquidus temperature and viscosity of converter slag on its foaming behavior is established.Keywords
This publication has 7 references indexed in Scilit:
- Viscosity of Highly Basic SlagsISIJ International, 2007
- Modeling of viscosities of the partly crystallized slags in the Al2O3-CaO-“FeO”-SiO2 systemMetallurgical and Materials Transactions B, 2001
- Viscosity of a CaO-MgO-Al2O3-SiO2 melt containing spinel particles at 1646KMetallurgical and Materials Transactions B, 2000
- The Slag Foaming Practice in EAF and Its Influence on the Steelmaking Shop Productivity.ISIJ International, 1995
- Slag foaming in bath smeltingMetallurgical Transactions B, 1991
- Study on the foaming of CaO-SiO2-FeO slags: Part II. Dimensional analysis and foaming in iron and steelmaking processesMetallurgical Transactions B, 1989
- Study on the foaming of CaO-SiO2-FeO slags: Part I. Foaming parameters and experimental resultsMetallurgical Transactions B, 1989