Flexible 2.4 GHz Node for Body Area Networks With a Compact High-Gain Planar Antenna
- 9 November 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 18 (1) , 49-53
Abstract
A flexible 2.4 GHz wireless sensor node with a bespoke single layer monopole antenna, tuned for on-body operation for wearable applications, is presented. Multiple antenna design approaches for tuning on-body antennas have been investigated. The proposed antennas, patch and meandered, designed for operation in the insole, exhibit a simulated realised gain of -3.98 dB and -1.97 dB respectively. The antennas were fabricated on a 25 μm flexible polyimide substrate, exhibiting up to 16% lower insertion losses at 20 GHz than FR4 PCBs. The integrated node incorporates a commercial Bluetooth Low Energy (BLE) system-on-chip and exhibits 9 dB higher measured gain than commercial modules with reference antenna design. Moreover, through functional radio test, it was confirmed that the designed node passes Bluetooth transmitter certification tests.Keywords
Funding Information
- European Commission
- European Infrastructure Powering the Internet of Things (H2020-EU.1.4.1.2)
- Engineering and Physical Sciences Research Council
- Novel Manufacturing Methods for Functional Electronic Textiles (EPSRC EP/M015149/1)
This publication has 12 references indexed in Scilit:
- Flexible and Stretchable Brush-Painted Wearable Antenna on a Three-Dimensional (3-D) Printed SubstrateIEEE Antennas and Wireless Propagation Letters, 2017
- A Dual-Mode Single-Band Wearable Microstrip Antenna for Body Area NetworksIEEE Antennas and Wireless Propagation Letters, 2017
- A Flexible 2.45-GHz Power Harvesting Wristband With Net System Output From −24.3 dBm of RF PowerIEEE Transactions on Microwave Theory and Techniques, 2017
- A WiFi tracking device printed directly on textile for wearable electronics applications2016
- A Compact Parylene-Coated WLAN Flexible Antenna for Implantable ElectronicsIEEE Antennas and Wireless Propagation Letters, 2015
- Energy harvesting study on single and multilayer ferroelectret foams under compressive forceIEEE Transactions on Dielectrics and Electrical Insulation, 2015
- Inkjet-Printed Microstrip Patch Antennas Realized on Textile for Wearable ApplicationsIEEE Antennas and Wireless Propagation Letters, 2014
- A Smart Textile Based Facial EMG and EOG Computer InterfaceIEEE Sensors Journal, 2013
- Robust planar textile antenna for wireless body LANs operating in 2.45 GHz ISM bandElectronics Letters, 2006
- Implanted Antennas Inside a Human Body: Simulations, Designs, and CharacterizationsIEEE Transactions on Microwave Theory and Techniques, 2004