A Novel Method to Evaluate the Influence of Hydrogen on Fatigue Properties of High Strength Steels
Authors:
- 1 February 2006
- journal article
- research article
- Published by ASTM International in Journal of ASTM International
- Vol. 3 (2) , 1-13
Abstract
In rolling contact fatigue, hydrogen is believed to contribute to early flaking failures under some conditions. Hydrogen diffuses quickly in steels, even at room temperature, thus resulting in its dissipation into the surrounding atmosphere. This condition presents a uniquely difficult challenge for evaluating the intrinsic fatigue properties related to hydrogen embrittlement. In order to compensate for this, we employed ultrasonic fatigue testing at a loading frequency of 20 kHz, because a high loading frequency offsets the rapid hydrogen loss. In this report, the fatigue properties of hydrogen pre-charged JIS-SUJ2 (SAE52100 equivalent) were assessed. The amount of hydrogen was quantitatively measured by thermal desorption analysis. The diffusion coefficient of hydrogen was determined via electrochemical hydrogen permeation testing. These results indicate that the magnitude of fatigue strength reduction is directly proportional to the diffusible hydrogen content. Included with this report is our proposed method for evaluating fatigue strength related to hydrogen embrittlement.Keywords
This publication has 22 references indexed in Scilit:
- Ultrasonic fatigue tests on bearing steel AISI-SAE 52100 at frequency of 20 and 30 kHzInternational Journal of Fatigue, 2003
- The influence of hydrogen on rolling contact fatigue life and its improvementJSAE Review, 2003
- Characteristic S–N properties of high‐carbon–chromium‐bearing steel under axial loading in long‐life fatigueFatigue & Fracture of Engineering Materials & Structures, 2002
- Gigacycle fatigue properties for high-strength low-alloy steel at 100 Hz, 600 Hz, and 20 kHzScripta Materialia, 2002
- Accelerated failure in high strength steel by alternating hydrogen-charging potentialScripta Materialia, 2001
- Advances in Physical Metallurgy and Processing of Steels. Function of Hydrogen in Embrittlement of High-strength Steels.ISIJ International, 2001
- Effect of hydrogen in steel on fatigue fracture for carburized steel.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 1985
- Inhibition of Water-Accelerated Rolling-Contact FatigueJournal of Lubrication Technology, 1971
- Hydrogen penetration in water-accelerated fatigue of rolling surfacesPhilosophical Magazine, 1963
- The Formation of Hydrogen Peroxide on Fresh Metal SurfacesProceedings of the Physical Society. Section B, 1953