A relative crack opening time correlation for corrosion fatigue crack growth in offshore structures
- 21 October 2015
- journal article
- research article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 39 (4) , 395-411
Abstract
A considerable amount of research has been carried out on the prediction of mean stress effects on fatigue crack growth in structures. Newer types of structure are now being developed for use in highly dynamic, harsh marine environments, particularly for renewable energy applications. Therefore, the extent to which mean stresses can enhance corrosion‐assisted fatigue damage in these structures needs to be better understood. A new theoretical model that accounts for mean stress effects on corrosion fatigue crack growth is proposed. The model is developed based on the relative crack opening period per fatigue cycle and by considering only the damaging portion of the stress cycle. The baseline data for the modelling exercise are the data obtained at a stress ratio of 0.1 in air and seawater tests conducted on compact tension specimens. The model is validated by comparison with experimental data and with other fatigue crack propagation models. The proposed model correlates fairly well with experimental data and the other models examined.Keywords
Funding Information
- Petroleum Technology Development Fund
This publication has 25 references indexed in Scilit:
- A general equation for Kop and KPR descriptionEngineering Fracture Mechanics, 2008
- A study of the stress ratio effects on fatigue crack growth using the unified two-parameter fatigue crack growth driving forceInternational Journal of Fatigue, 2007
- Correlation and prediction of fatigue crack growth for different R-ratios using Kmax and ΔK+ parametersEngineering Fracture Mechanics, 2004
- A new (ΔK+Kmax)0.5 driving force parameter for crack growth in aluminum alloysInternational Journal of Fatigue, 2001
- The effect of frequency and microstructure on corrosion fatigue crack propagation in high strength aluminium alloysActa Materialia, 1997
- THE EFFECT OF CATHODIC PROTECTION POTENTIAL ON CORROSION FATIGUE CRACK GROWTH RATE OF AN OFFSHORE STRUCTURAL STEELFatigue & Fracture of Engineering Materials & Structures, 1996
- Influence of stress ratio on fatigue crack growth in mild steelEngineering Fracture Mechanics, 1995
- Some formulas for the crack opening stress levelEngineering Fracture Mechanics, 1981
- Corrosion-fatigue crack propagation belowEngineering Fracture Mechanics, 1971
- A Critical Analysis of Crack Propagation LawsJournal of Basic Engineering, 1963