Adaptive and Real-Time Optimal Control of Stick–Slip and Bit Wear in Autonomous Rotary Steerable Drilling
- 24 October 2017
- journal article
- research article
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 140 (3)
Abstract
Deviated, horizontal, and multilateral wells are drilled to increase the contact area between the well path and the reservoir and as a result, the well productivity will be increased. Directional steering systems (DSS) are used to control the direction in nonvertical wells. Rotary steerable system (RSS) is the current state of the art of DSS. In this research, the problem of real-time control of autonomous RSS with unknown formation rock strength was presented. The aim of this study is to develop a real-time control scheme for real-time optimization of drilling parameters to (1) maximize the rate of penetration (ROP), (2) minimize the deviation from the planned well bore trajectory, (3) reduce the stick–slip oscillations, and (4) assess the degree of bit wear. Nonlinear model for the drilling operation was developed using energy balance equation, where rock specific energy (RSE) is used to calculate the minimum power required for a given ROP. A proposed mass spring system was used to represent the phenomena of stick–slip oscillation. The model parameters have been adaptively estimated at each control iteration to tackle any disturbances or variations in the formation properties. The bit wear is mathematically represented using Bourgoyne model. Detailed mathematical formulation and computer simulation were used for evaluation of the performance of the proposed technique based on real well field data. The obtained results showed excellent ability to accommodate the changes in the formation properties. In addition, the rates of bit wear and stick–slip oscillations have been optimized.Keywords
This publication has 26 references indexed in Scilit:
- Application of Real-Time Field Data to Optimize Drilling Hydraulics Using Neural Network ApproachJournal of Energy Resources Technology, 2015
- A Case Study of Real-Time Drilling Optimization to Improve Well Delivery through Enhancing Drilling Rates and Identifying Invisible Lost Time to Improve Performance2015
- Stability and response of closed loop directional drilling system using linear delay differential equations2011
- Real Time Optimization of Drilling Parameters During Drilling Operations2010
- Implementation of a Bottom-Hole Assembly ProgramJournal of Energy Resources Technology, 2008
- Real-Time Drill Bit Wear Prediction by Combining Rock Energy and Drilling Strength Concepts2008
- How to Etimate the Maximum Achievable Drilling Rate without Jeopardizing Safety2002
- Quantifying Common Drilling Problems With Mechanical Specific Energy and a Bit-Specific Coefficient of Sliding Friction1992
- A Multiple Regression Approach to Optimal Drilling and Abnormal Pressure DetectionSociety of Petroleum Engineers Journal, 1974
- The concept of specific energy in rock drillingInternational Journal of Rock Mechanics and Mining Sciences, 1965