Conversion of tars on solid oxide fuel cell anodes and its impact on voltages and current densities
Open Access
- 7 August 2017
- journal article
- research article
- Published by Wiley in Energy Science & Engineering
- Vol. 5 (4) , 194-207
Abstract
This paper focuses on tar conversion on solid oxide fuel cell (SOFC) anodes and its consequences for operation performance and degradation issues. Based on an extensive literature review it discusses the chemical behavior of tar species in typical gas environments/operation conditions at the Nickel anode and describes an experimental investigation methodology. A numerical 1‐D discretized cell model is developed that represents global tar conversion kinetics on SOFC anodes based on an Arrhenius power law approach. This permits the determination of the apparent kinetic rate constants based on simple OCV measurements at cells operated on tar‐laden gases. The approach is applied and verified with measurement data from literature. Resulting conversion rate constants varied with the investigated tar species (naphthalene, toluene) and the operation temperature (800–900°C) in the range 0.1–1.04 mol/sec/m2/bar. The results showed good consistency within varying tar concentration levels and with FID measurement in the off gas of the SOFC anodes.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft
- Friedrich-Alexander-Universität Erlangen-Nürnberg
This publication has 56 references indexed in Scilit:
- A Review of RedOx Cycling of Solid Oxide Fuel Cells AnodeMembranes, 2012
- The interaction of biomass gasification syngas components with tar in a solid oxide fuel cell and operational conditions to mitigate carbon deposition on nickel-gadolinium doped ceria anodesJournal of Power Sources, 2011
- Biomass integrated gasification fuel cell systems–Concept development and experimental resultsBiomass and Bioenergy, 2011
- The impact of steam and current density on carbon formation from biomass gasification tar on Ni/YSZ, and Ni/CGO solid oxide fuel cell anodesJournal of Power Sources, 2010
- Integrating biomass gasification with solid oxide fuel cells: Effect of real product gas tars, fluctuations and particulates on Ni-GDC anodeInternational Journal of Hydrogen Energy, 2008
- Biosyngas Utilization in Solid Oxide Fuel Cells With Ni∕GDC AnodesJournal of Fuel Cell Science and Technology, 2006
- Four challenges for nickel steam-reforming catalystsCatalysis Today, 2006
- Combination of thermochemical recuperative coal gasification cycle and fuel cell for power generationFuel, 2005
- Two Advanced Models for the Kinetics of the Variation of the Tar Composition in Its Catalytic Elimination in Biomass GasificationIndustrial & Engineering Chemistry Research, 2003
- Advances in catalysts for internal reforming in high temperature fuel cellsJournal of Power Sources, 1998