Mechanical Properties of Douglas Fir Wood at Elevated Temperatures under Nitrogen Conditions
Authors:
- 1 February 2022
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 34 (2) , 04021434
Abstract
The mechanical properties of wood tend to decrease with increasing temperature under normal atmospheric conditions. A pyrolysis zone develops inside wood when it catches fire, and the surface is charred; it is important to understand the mechanical properties of the wood under the charred surface. In this study, the mechanical properties of Douglas fir wood, such as its compressive, tensile, and bending strengths, were measured under nitrogen atmosphere at nine temperatures between 20°C and 280°C for exposure times ranging from 60 to . The results indicated that the wood’s mechanical properties under the nitrogen atmosphere (i.e., oxygen-depleted conditions) decreased with increasing temperature, and the exposure time had little effect on the investigated properties. The mechanical properties of the wood under the charred surface exhibited a nonlinear decrease with increasing temperature due to the hydrolysis reactions. The mechanical properties were accurately described by temperature-dependent equations combining a linear model with three polynomial functions. Scanning electron microscopy revealed that high temperatures in the oxygen-free environment induced severe microstructural damage to the wood.
Keywords
This publication has 39 references indexed in Scilit:
- Southern pine impregnated with silicate solution containing cellulose nanofibrilsHolzforschung, 2012
- Thermal degradation of bending properties of structural wood and wood-based compositesHolzforschung, 2011
- Influence of the temperature on the compression strength parallel to grain of paricáConstruction and Building Materials, 2010
- Effect of High-Temperature Treatment on the Mechanical Properties of Rowan (Sorbus aucupariaL.) WoodDrying Technology, 2009
- Temperature distribution within glued laminated timber during a standard fire exposure testMaterials & Design (1980-2015), 2009
- MICROSTRUCTURAL AND PHYSICAL ASPECTS OF HEAT TREATED WOOD: PART 2. HARDWOODSMaderas. Ciencia y Tecnología, 2006
- Compression mechanical properties of wood at temperatures simulating fire conditionsFire and Materials, 2001
- Charring rate of wood for ASTM E 119 exposureFire Technology, 1992
- Wood tensile strength at temperatures and moisture contents simulating fire conditionsWood Science and Technology, 1985
- Effect of Pyrolytic Temperatures on the Longitudinal Strength of Dry Douglas-FirJournal of Testing and Evaluation, 1973