A new method for electrodeposition of Al coatings from ionic liquids on AZ91D Mg alloy in air
Open Access
- 23 November 2018
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (68) , 39170-39176
Abstract
Electrodeposition of Al on Mg alloys from ionic liquids has been achieved scientifically. However, it is difficult to realize industrialized production since the preparation of electroplating bath and electrodeposition process must be carried out under inert atmosphere. A simple and practical method was then proposed to guarantee such manipulations in air by introducing a solid water-adsorbent material as well as a liquid protective film in electroplating bath. In the experimental scale, functional Al layers were successfully electrodeposited on AZ91D Mg alloys from a first-generation ionic liquid AlCl3/1-butyl-3-methylimidazolium chloride (2 : 1 mol%). The electroplating process was further investigated at constant current and constant potential. A phase of Al of the formed coatings was determined using X-ray diffraction. It was found that a continuous and compact Al film can be obtained on the Mg alloy surface at a constant current along with effective protection, as characterized by scanning electron microscopy, energy disperse spectrometry, potentiodynamic polarization curve and Nyquist plot.Keywords
Funding Information
- Special Fund for Agro-scientific Research in the Public Interest (201503108)
This publication has 19 references indexed in Scilit:
- Copper(I)‐Containing Ionic Liquids for High‐Rate ElectrodepositionChemistry – A European Journal, 2011
- Do all ionic liquids need organic cations? Characterisation of [AlCl2·nAmide]+ AlCl4− and comparison with imidazolium based systemsChemical Communications, 2011
- Optimization of pulsed electrodeposition of aluminum from AlCl3-1-ethyl-3-methylimidazolium chloride ionic liquidElectrochimica Acta, 2011
- Electrodeposition of chemically and mechanically protective Al-coatings on AZ91D Mg alloyCorrosion Science, 2011
- Aluminium electroplated from ionic liquids as protective coating against steel corrosionCorrosion Science, 2008
- Electroless Plating of Aluminum from a Room-Temperature Ionic Liquid ElectrolyteJournal of the Electrochemical Society, 2008
- Electrodeposition onto magnesium in air and water stable ionic liquids: From corrosion to successful platingElectrochemistry Communications, 2007
- Electrodeposition of aluminum on magnesium alloy in aluminum chloride (AlCl3)–1-ethyl-3-methylimidazolium chloride (EMIC) ionic liquid and its corrosion behaviorElectrochemistry Communications, 2007
- Air and water stable ionic liquids in physical chemistryPhysical Chemistry Chemical Physics, 2006
- Additive free electrodeposition of nanocrystalline aluminium in a water and air stable ionic liquidElectrochemistry Communications, 2005