Robust Observer Based Intermittent Forces Estimation for Driver Intervention Identification
- 20 February 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 69 (4) , 3628-3640
Abstract
On the way to fully automated driving, Level 3 automated driving systems (ADS) seem to be a more realistic choice in the short term. Within operational design domain (ODD), although the driver is not required to monitor the vehicle all the time, it is expected that the driver is ready to intervene in the ADS whenever certain risks are encountered. Hence, timely identification of driver intervention in the vehicle lays the foundation for safe switching from the ADS to the driver. Although many researches have been conducted on driver torque estimation in the last decade, most of them are based on electric power steering (EPS) systems, therefore are not quite suitable for application in steer-by-wire (SBW) systems, which shall be the next generation steering systems. In view of this, the SBW system parameters with uncertainties are first identified through experiments. Then, a PID controller and a robust observer considering Coulomb friction are designed and analyzed for the SBW systems, so that the system is asymptotically stable and the driver torque can be identified irrespective of parameter uncertainties and system noises. Detailed experimental results on a hardware-in-the-loop test bench verify the effectiveness of the proposed method, which shall also be implementable in a real vehicle.Keywords
Funding Information
- National Key Research and Development Program of China Stem Cell and Translational Research (2017YFB0103903)
- National Natural Science Foundation of China (51875302, 51675293)
- Major Science and Technology Program of Anhui Province (JAC2019030105)
This publication has 28 references indexed in Scilit:
- Robust sliding‐mode observers for large‐scale systems with application to a multimachine power systemIET Control Theory & Applications, 2017
- Correction of contaminated yaw rate signal and estimation of sensor bias for an electric vehicle under normal driving conditionsMechanical Systems and Signal Processing, 2017
- Robust PID Design Based on QFT and Convex–Concave OptimizationIEEE Transactions on Control Systems Technology, 2016
- Shared Steering Control Using Safe Envelopes for Obstacle Avoidance and Vehicle StabilityIEEE Transactions on Intelligent Transportation Systems, 2015
- Optimization Strategy for PID-Controller Design of AMB Rotor SystemsIEEE Transactions on Control Systems Technology, 2015
- Robust energy-to-peak sideslip angle estimation with applications to ground vehiclesMechatronics, 2015
- Nonlinear Robust Observers for State-of-Charge Estimation of Lithium-Ion Cells Based on a Reduced Electrochemical ModelIEEE Transactions on Control Systems Technology, 2015
- Both vehicle state and driver's torque estimation using Unknown Input Proportional Multi-Integral T-S observer2014
- Robust gain-scheduling energy-to-peak control of vehicle lateral dynamics stabilisationVehicle System Dynamics, 2014
- A nonlinear disturbance observer for robotic manipulatorsIEEE Transactions on Industrial Electronics, 2000