An environmental approach to cement admixtures: Utilization of waste olive seed powder as a bio-polymeric admixture
- 22 October 2024
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (52) , 61690-61710
Abstract
The integration of organic wastes into cement-based materials shows promise as a solution to mitigate environmental pollutants. It achieves this by minimizing waste sent to landfills and in some conditions decreasing Portland cement use. One of these organic wastes that produces positive effects when used in cement products is olive seed. In this study, the effect of a new generation bio-polymeric admixture on the physical and mechanical properties of cement mortars is examined in detail. The bio-polymeric admixture is prepared by grinding olive seeds in 0/125 μm sizes. The olive seeds have been used as bio-polymeric admixture in cement mortars at different rates, i.e., 0, 0.2, 0.35, 0.5, 1 and 1.5% of total weight. The olive seed is characterized by XRD, FT-IR analysis and by determining extracts, pectin, cellulose, hemicellulose and lignin content. The characteristics of hydration products were analyzed by SEM/EDS and XRD investigations. Effect of bio-polymeric admixture addition on the unit weight, flowability, setting time, compressive and flexural strength and capillary water absorption was analyzed. The results suggested that the bio-polymeric admixture hindered the cement hydration at low usage rates but promoted at high usage rates. Accordingly, 28 days compressive and flexural strength of test samples decreased. However, 1.5 wt% bio-polymeric admixture was associated with a slight increase of 150-days compressive strength. Bio-polymeric admixture improves the hydrophobicity property of the hardened mortar samples by declining effect on the water absorption. Another important effect of the bio-polymeric admixture contribution was also observed on the flowability property of the cement mortars. As the bio-polymeric admixture increased, the flow diameter values of the mortar were also significantly increased. The research outcomes suggested for the first time the beneficial effect of bio-polymeric admixture as a natural and bio-degradable alternative of chemical admixtures on especially flowability, set retarder and hydrophobicity of cement mortars with comparable mechanical properties. Graphical AbstractKeywords
Funding Information
- İzmir Katip Çelebi Üniversitesi Bilimsel Araştırma Projeleri Koordinatörlüğü (2019-TDR-FEBE-0014)
This publication has 75 references indexed in Scilit:
- Effect of olive waste ash on the properties of high‐strength geopolymer concreteStructural Concrete, 2024
- Structural changes of waste biomass induced by alkaline treatment: the effect on crystallinity and thermal propertiesBiomass Conversion and Biorefinery, 2020
- Sisal fiber-reinforced cement composite with Portland cement substitution by a combination of metakaolin and nanoclayJournal of Materials Science, 2014
- Properties of Concrete Incorporating Recycled Post-Consumer Environmental WastesInternational Journal of Concrete Structures and Materials, 2014
- The influence of oleic acid on the hydration and mechanical properties of portland cementJournal of Wuhan University of Technology-Mater. Sci. Ed., 2013
- Effect of calcium rich and alkaline solutions on the chemical behaviour of hemp fibresJournal of Materials Science, 2007
- The function of fillers in concreteMaterials and Structures, 2004
- Lipids and phenols in table olivesEuropean Journal of Lipid Science and Technology, 2003
- The Structure, Stoichiometry and Properties of C-S-H Prepared by C3S Hydration Under Controlled Condition1998
- Composition of Lipid Classes in the Morphologically Different Parts of the Olive Fruit, cv. Coratina (Olea europaea Linn.)Chemische Umschau auf dem Gebiet der Fette, Oele, Wachse und Harze, 1994