Effect of the surface coating of carbonyl iron particles on the dispersion stability of magnetorheological fluid
Open Access
- 18 May 2024
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-15
Abstract
The dispersion stability of carbonyl iron particle (CIP)-based magnetorheological fluid (MRF) is improved by CIP, which particle is etched with hydrochloric acid (HCl) to form porous structure with many hydroxyl groups and subsequently coated with silane coupling agents that have varying chain lengths. The microstructures, coating effect and magnetism of the CIPs were examined using the Scanning Electron Microscopy, Automatic Surface and Porosity Analyzer (BET), Fourier-Transform Infrared Spectroscopy, Thermogravimetric Analysis and Vibrating Sample Magnetometer. Furthermore, the rheological properties and dispersion stability of the MRFs were assessed using a Rotating Rheometer and Turbiscan-lab. The results revealed that the nanoporous structure appeared on the CIPs and the specific surface area increased remarkably after being etched by hydrochloric acid. Additionally, as the chain length of the silane coupling agent increases, the coated mass on the particles increases, the the density and the saturation magnetization of particles decreased, and the coated particles with different shell thicknesses were obtained; without a magnetic field, the viscosity of MRF prepared by coated particles increase slightly, due to the enhancement of special three-dimensional network structure; under a magnetic field, the viscosity of the MRF decreased distinctly; the sedimentation rate of MRF decreased from 58 to 3.5% after 100 days of sedimentation, and the migration distances of the MRFs were 22.4, 3.7, 2.4, and 0 mm, with particle sedimentation rates of 0.149, 0.019, 0.017, and 0 mm/h, respectively. The MRF with high dispersion stability was obtained, and the etching of CIP by HCl and the proper chain length of the coating of silane coupling agent were proved effective manners to improve the dispersion stability of MRF.Keywords
Funding Information
- National Natural Science Foundation of China (52379092, 52379092, 52379092)
- Open Research Subject of Key Laboratory of Fluid Machinery and Engineering (LTJX-2023003)
This publication has 60 references indexed in Scilit:
- Stable Magnetorheological Fluids Containing Bidisperse Fillers with Compact/Mesoporous Silica CoatingsInternational Journal of Molecular Sciences, 2022
- Enhanced magnetorheological effect of suspensions based on carbonyl iron particles coated with poly(amidoamine) dendronsRheologica Acta, 2021
- Magnetorheological fluids based on core–shell carbonyl iron particles modified by various organosilanes: synthesis, stability and performanceSoft Matter, 2020
- Rheological investigation of magnetic sensitive biopolymer composites: effect of the ligand grafting of magnetic nanoparticlesRheologica Acta, 2020
- Material Characterization of Magnetorheological Elastomers with Corroded Carbonyl Iron Particles: Morphological Images and Field-dependent Viscoelastic PropertiesInternational Journal of Molecular Sciences, 2019
- Modification of carbonyl iron particles by carboxyl-containing polydimethylsiloxanesRussian Chemical Bulletin, 2018
- Quantitative measurement of physisorbed silane on a silica particle surface treated with silane coupling agents by thermogravimetric analysisJournal of Applied Polymer Science, 2015
- Enhanced conductivity of magnetorheological fluids based on silver coated carbonyl particlesJournal of Materials Science: Materials in Electronics, 2015
- An experimental study on the effects of temperature and magnetic field strength on the magnetorheological fluid stability and MR effectSoft Matter, 2015
- Preparation of well-dispersed magnetorheological fluids and effect of dispersion on their magnetorheological propertiesRheologica Acta, 2008