Synthesis of an electroconductive membrane using poly(hydroxymethyl-3,4-ethylenedioxythiophene-co-tetramethylene-N-hydroxyethyl adipamide)
- 30 July 2013
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 1 (39) , 6347-6354
Abstract
Synthesis of a novel electroconductive membrane (ECM) was studied with the aim of producing an electroconductive membrane (ECM) with low electrical resistance and appropriate mechanical properties. The method was based on copolymerization of a highly electroconductive monomer (hydroxymethyl-3,4-ethylenedioxythiophene) with highly mechanical resistant hydrophilized polyamide 46 (polytetramethylene-N-hydroxyethyl adipamide). Due to the lack of hydroxyl groups, polyamide 46 does not have the tendency to take part in any chemical reactions, therefore prior to copolymerization, PA 46 was hydrophilized with acetaldehyde to create reactive sites, which allowed copolymerization to occur. At the final stage, a very thin layer, 566 nm conductive poly(hydroxymethyl-3,4-ethylenedioxythiophene) homopolymer was localised using in situ plasma polymerization in order to improve the electrical conductivity of the obtained copolymer. The result was an adherent, highly conductive, semi-hydrophilic and flexible ECM. The presence of hydroxyl groups in the final product led to improved hydrophilicity of the conductive membrane with a surface tension of 41 mJ m−2. The electrical resistance of PA 46 was dramatically reduced after copolymerization, to 202 in dry and 54 kΩ cm−2 in wet conditions; furthermore, after plasma treatment, this reduction continued to 105 in dry and 2 kΩ cm−2 in wet conditions. Other parameters such as flux flow, roughness, pore size, pore distribution, contact angle, surface energy and thermal stability of the ECM were also investigated.Keywords
This publication has 17 references indexed in Scilit:
- Conductive paper through LbL multilayering with conductive polymer: dominant factors to increase electrical conductivityCellulose, 2012
- Cable‐Type Flexible Lithium Ion Battery Based on Hollow Multi‐Helix ElectrodesAdvanced Materials, 2012
- The impact of hydrophobic coating on the performance of carbon nanotube bucky-paper membranes in membrane distillationDesalination, 2011
- Carbon Nanotube‐Adsorbed Electrospun Nanofibrous Membranes as Coating for Electrochemical Sensors for Sulfhydryl CompoundsElectroanalysis, 2011
- Flexible Electrically Conductive Nanocomposite Membrane Based on Bacterial Cellulose and PolyanilineThe Journal of Physical Chemistry B, 2011
- Optimization of the thickness of a conducting polymer, polyaniline, deposited on the surface of poly(vinyl chloride) membranes: A new way to improve their potentiometric responseAnalytica Chimica Acta, 2008
- Polymerization of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) around living neural cellsBiomaterials, 2007
- Polyamide 4,6 membranes for the encapsulation of Langerhans islets: preparation, physico-chemical properties and biocompatibility studiesJournal of Materials Science: Materials in Medicine, 1997
- Electrically conductive membranes: Synthesis and applicationsJournal of Membrane Science, 1990
- Electrochemical polymerization of pyrrole in the presence of latexesSynthetic Metals, 1986