The digital Silicon Photomultiplier — A novel sensor for the detection of scintillation light
Authors:
- 1 October 2009
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10823654,p. 2383-2386
Abstract
We developed a fully digital Silicon Photomultiplier (dSiPM) of 3.8 mm × 3.3 mm in size containing 8188 individual Geiger-mode cells. Each detected photon is directly converted into a digital signal in each of the Geiger-mode cells of the sensor. In addition, the complete trigger logic and a time-to-digital converter are integrated into the sensor. To show the performance of the sensor, LYSO crystals of different sizes were coupled to the sensor. The coincidence timing resolution for 3 mm × 3 mm × 5 mm LYSO crystals using a 22 Na source amounts to 153 ps FWHM. The energy resolution at 511 keV was determined to be 10.7 % for 4 mm × 4 mm × 22 mm crystals. It is shown that saturation correction can be done without prior need for sensor calibration. The temperature dependence of the photon detection efficiency was found to be -0.6 %/°C including the temperature variation of the light output of LYSO.Keywords
This publication has 6 references indexed in Scilit:
- The digital silicon photomultiplier — Principle of operation and intrinsic detector performance2009
- Optical and Scintillation Properties of Inorganic Scintillators in High Energy PhysicsIEEE Transactions on Nuclear Science, 2008
- Energy resolution and absolute detection efficiency for LSO crystals: A comparison between Monte Carlo simulation and experimental dataNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2007
- Comparative Study of Scintillators for PET/CT DetectorsIEEE Transactions on Nuclear Science, 2007
- Scintillation detection using 3 mm × 3 mm silicon photomultipliers2007
- A Study on the Temperature Characteristics of LYSO PET Detector2006