Optimal design of friction pendulum tuned mass damper with varying friction coefficient
Authors:
- 3 February 2012
- journal article
- research article
- Published by Hindawi Limited in Structural Control and Health Monitoring
- Vol. 20 (4) , 544-559
Abstract
Tuned mass dampers with viscous damping and isolation systems with friction pendulums have been proposed and widely applied over the past several decades. By combining these two ideas, a friction pendulum tuned mass damper (FPTMD) is proposed in this study. Because the restoring and friction forces are provided by the spherical surface of the FPTMD, springs and dampers are not needed. Moreover, suspension is not necessary and the installation space is greatly reduced. The optimal design of the FPTMD with varying friction coefficients for wind-excited high-rise structures is investigated. The optimization procedures are demonstrated by the FPTMD implemented on Taipei 101 under white-noise wind force, and the optimization results are validated by three-dimensional graphs. From the results of the sensitivity study, the effectiveness of the FPTMD with two different patterns of friction coefficients is sensitive to the tuning frequency ratio but not very sensitive to the friction parameters. Moreover, an FPTMD with a friction coefficient that linearly varies with displacement is even less sensitive to the friction parameters and the amplitude of excitation. The feasibility of the FPTMD with two different patterns of friction coefficient is illustrated by Taipei 101 subjected to the design wind force with a return period of 50 years. Following design optimization and numerical verification, the effect of vibration reduction for Taipei 101 is demonstrated. Copyright © 2012 John Wiley & Sons, Ltd.Keywords
This publication has 32 references indexed in Scilit:
- Variable friction pendulum system for near-fault ground motionsStructural Control and Health Monitoring, 2007
- Tuned mass damper with nonlinear viscous dampingJournal of Sound and Vibration, 2007
- Estimating double tuned mass dampers for structures under ground acceleration using a novel optimum criterionJournal of Sound and Vibration, 2006
- Dynamic analysis of structures with friction devices using discrete-time state-space formulationComputers & Structures, 2006
- Optimum parameters of tuned mass damper for damped main systemStructural Control and Health Monitoring, 2006
- Effects of unbounded media on seismic responses of FPS-isolated structuresStructural Control and Health Monitoring, 2004
- A METHOD OF ESTIMATING THE PARAMETERS OF TUNED MASS DAMPERS FOR SEISMIC APPLICATIONSEarthquake Engineering & Structural Dynamics, 1997
- OPTIMUM PARAMETERS OF MULTIPLE TUNED MASS DAMPERS FOR BASE-EXCITED DAMPED SYSTEMSJournal of Sound and Vibration, 1997
- Explicit Formulae For Optimum Absorber Parameters For Force-Excited And Viscously Damped SystemsJournal of Sound and Vibration, 1994
- On the Dynamic Vibration Damped Absorber of the Vibration SystemBulletin of JSME, 1978