Assessment of intergranular corrosion of heat treated austenitic stainless steel (AISI 316L Grade) by electron microscopy and electrochemical tests
Authors:
- 10 September 2008
- journal article
- Published by Pleiades Publishing Ltd in Protection of Metals
- Vol. 44 (5) , 506-513
Abstract
The resistance of austenitic stainless steel to intergranular corrosion (IGC) varies during the process of aging at temperatures between 500 and 700°C. This follows the well-known phenomena of precipitating of M23C6 chromium carbides and intermetallic phases (η, σ, χ). Consequently, this leads to significant Cr-depletion zones at grain boundaries responsible for material sensitization to IGC. The assessment of the sensitivity to IGC from the Strauss or equivalent tests requires cutting a sample off the material, which can be harmful to the integrity of the structure in service. Such a sampling is in essence only qualitative and insufficiently sensitive to the low widths of Cr-depletion at the beginning of precipitation. The DL-EPR method (Double-Loop Electrochemical Potentiodynamic Reactivation test) is known to be a non-destructive and quantitative test method of detecting relatively mild degrees of sensitization in austenitic stainless steel. The current ratios Ir/Ia > 1% (sensitization criteria) and, as a consequence, the electric charge ratios Qr/Qa > 1% of the degree of sensitization (DOS) to intergranular corrosion can be considered as good parameter values to differentiate materials with only difference in the DOS and to detect the fine precipitation responsible for the depletion in the elements of an alloy. This criteria is also valid for the detection of desensitization during againg for longer periods of time.Keywords
This publication has 17 references indexed in Scilit:
- Resistance to sensitization and intergranular corrosion through extreme randomization of grain boundariesActa Materialia, 2002
- On the development of the electrochemical potentiokinetic methodElectrochimica Acta, 2001
- Intergranular corrosion of AISI 316L steelMaterials Characterization, 2001
- Application of double loop electrochemical potentiodynamic reactivation test to austenitic and duplex stainless steelsMaterials Science and Engineering: A, 1997
- Influence of thermal aging on the intergranular corrosion resistance of types 304LN and 316LN stainless steelsMetallurgical and Materials Transactions A, 1996
- Polarization Behavior of Austenitic and Duplex Stainless Steels in the Double Loop Reactivation TestCorrosion, 1987
- The Double Loop Reactivation Method for Detecting Sensitization in AISI 304 Stainless SteelsCorrosion, 1984
- Potentiodynamic Reactivation Method for Detecting Sensitization in AISI 304 and 304L Stainless SteelsCorrosion, 1984
- A potentiokinetic reactivation method for predicting the I.C.C. and I.G.S.C.C. sensitivity of stainless steels and alloysCorrosion Science, 1980
- Comparative Methods for Measuring Degree of Sensitization in Stainless Steel1978