Preparation of silica hybrid membranes for high temperature gas separation

Authors:
  • MNMikihiro Nomura
    Mikihiro Nomura
  • KMKeita Momma
    Keita Momma
  • YNYoshio Negishi
    Yoshio Negishi
  • EMEmi Matsuyama
    Emi Matsuyama
  • SKSayuka Kimura
    Sayuka Kimura

Abstract
A molecular sieve silica hybrid membrane was successfully prepared by using a counter diffusion chemical vapor deposition (CVD) method. Propyltrimethoxysilane (PrTMOS) was employed for a silica precursor. O3 was used as an oxidizer. Effects of deposition temperatures on permeation properties through the silica membranes were investigated. H2 (0.29 nm), N2 (0.36 nm) and SF6 (0.55 nm) permeances were measured at the deposited temperatures through the membranes. H2/N2 permeances ratios decreased sharply with increasing the deposition temperatures from 200°C to 400°C. In addition, H2 permeance through the membrane deposited at 400°C was very high (4.6 × 10−7 mol m−2 s−1 Pa−1) with a low H2/N2 permeances ratio (3.4). This shows that silica was not deposited at 400°C due to O3 decomposition at the high temperature deposition. On the other hand, N2/SF6 permeances ratios increased with increasing the deposition temperatures upto 320°C. The maximum value of N2/SF6 permeances ratio was 110 at 320°C deposition. This...

This publication has 14 references indexed in Scilit: