Investigation on Segregation Granulation by Fuel and Flux in Coating
Open Access
Abstract
The metallurgical property of sinter is an important factor affecting the smooth operation of blast furnaces (BF), because it has a great impact on the permeability of BF and solid fuel rate. In order to promote the combustion of solid fuel and the mineralization of flux in sintering process, and eventually improve the strength of sintered ore, a series of investigation on segregation granulation by fuel and flux in coating were carried out, including the sinter pot experiments, the morphology analysis, and the discussion combine with phase diagram. The experimental results show that, (1) as the CaO increased from 0% to 40% and coke breeze increased from 0% to 100%, the sintering indices were improved, the tumble strength of sinter increased from 65.8% to 68.4%, the rate of qualified products increased from 77.4% to 81.0%, and the micro-strength of sinter increased from 68.7% to 75.9%. (2) There are three reasons for the high strength of sinter by segregation granulation of fuel and flux in coating, (a) the complete combustion of solid fuel and release the heat, (b) the effective absorb heat and mineralization of flux, and (c) the improvement of fluidity of bonding phase. The outcomes of the present work may provide a new method to improve the strength of sintered ore and give some reference for better understanding segregation granulation process and using it in actual operation.Keywords
Funding Information
- The National Natural Science Foundation of China (NSFC 62001312, NSFC 52074074, NSFC 51874080, NSFC 51974073, 2021YFC2902400, XLYC2007152, 2021-MS-269)
- the national key Research and Development Program of China (NSFC 62001312, NSFC 52074074, NSFC 51874080, NSFC 51974073, 2021YFC2902400, XLYC2007152, 2021-MS-269)
- the Xingliao Talent Project (NSFC 62001312, NSFC 52074074, NSFC 51874080, NSFC 51974073, 2021YFC2902400, XLYC2007152, 2021-MS-269)
- the Science and Technology Project of Liaoning (NSFC 62001312, NSFC 52074074, NSFC 51874080, NSFC 51974073, 2021YFC2902400, XLYC2007152, 2021-MS-269)
This publication has 22 references indexed in Scilit:
- Research on Ore-Proportioning Optimization Technology in SinteringApplied Mechanics and Materials, 2011
- Behavior of Liquid Phase Formation during Iron Ores SinteringISIJ International, 2011
- Influence of Coating Granulation Process on Iron Ore Sinter Quality and ProductivitySteel Research International, 2010
- Char gasification in mixtures of CO2 and H2O: Competition and inhibitionFuel, 2007
- Influence of Coal as an Energy Source on Environmental PollutionEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2007
- A Kinetic Analysis of Coal Char Gasification Reactions at High PressuresEnergy & Fuels, 2006
- An Equation for Accurate Prediction of the Viscosities of Blast Furnace Type Slags from Chemical CompositionISIJ International, 2000
- Simulation of pulverised coal test furnace performanceFuel, 1998
- Ignition and combustion of coal particle streamsFuel, 1995
- Lower limit of the energy consumption and the double ignition process for iron ore sintering.Transactions of the Iron and Steel Institute of Japan, 1988