A Two-dimensional Stress Analysis of Butt Adhesive Joints Having a Circular Hole Defect in the Adhesive Subjected to External Bending Moments
Authors:
- 1 January 1991
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 33 (3) , 133-147
Abstract
This paper deals with a two-dimensional stress analysis of butt adhesive joints, with a circular hole defect in the adhesive, subjected to external bending moments. The analysis was done using the two-dimensional theory of elasticity in order to examine the strength of the joints. It was assumed that the adherends were rigid and the adhesive was replaced with a finite strip including a hole defect. The effects of the location and size of a hole defect on the stress distributions around the hole and at the interfaces were obtained by numerical calculations. In addition, the singular stress near the edge of the interface was obtained. For verification, photoelastic experiments were performed. The analytical results were fairly consistent with the experimental results. It was seen that the principal stress around a hole becomes larger with a certain shift toward the free boundary. It was also seen that the stress concentration became larger with an increase of the size of the hole.Keywords
This publication has 9 references indexed in Scilit:
- Stress Analysis ofT-type Butt Adhesive Joint Subjected to External Bending MomentsThe Journal of Adhesion, 1987
- Two-dimensional Stress Analysis of Adhesive Butt Joints Subjected to Tensile LoadsBulletin of JSME, 1986
- Stresses in double-lap joints bonded with a viscoelastic adhesive. II - Parametric study and joint designAIAA Journal, 1980
- Analysis and Design of Adhesive Mechanical Characterization Test SpecimensThe Journal of Adhesion, 1979
- Stress analysis of axisymmetric butt joints loaded in torsion and tensionThe Journal of Strain Analysis for Engineering Design, 1978
- The adhesive scarf joint in pure bendingInternational Journal of Mechanical Sciences, 1976
- Analysis of Bonded Joints in Vehicular StructuresAIAA Journal, 1973
- Two Edge-Bonded Elastic Wedges of Different Materials and Wedge Angles Under Surface TractionsJournal of Applied Mechanics, 1971
- Stress Distribution in Bonded Joints *Journal of Composite Materials, 1971