Growth and Characterization of Metastable Hexagonal Nickel Thin Films via Plasma-Enhanced Atomic Layer Deposition
- 12 July 2017
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (29) , 24722-24730
Abstract
There is a great interest in various branches of the advanced materials industry for the development of novel methods (and improvements to existing ones) for the deposition of conformal ultrathin metallic films. In most of these applications, like enhanced solar absorbers and microelectronics, achieving the capacity to deposit a conformal thin film on a three-dimensional structure is an important condition. Plasma-enhanced atomic layer deposition (ALD) is known for its potential for growth of conformal thin films with a precise control over the thickness and its capability for deposition at relatively low temperatures (below 500 °C). This study evaluates the potential of plasma-enhanced ALD for growth of conformal nickel thin films, using bis(ethylcyclopentadienyl)nickel and nitrogen/hydrogen plasma as precursors. A comprehensive analysis of the structure, composition, and physical properties of the films was performed. The results indicate that conformal nickel films with low levels of impurity were successfully deposited on sapphire. The films had a roughness of Ra = 1.5 nm and were seen to be under strain. The deposited nickel had a hexagonal crystal structure, with a random in-plane orientation of the grains, while the grains had their c-axes oriented along the normal to the interface. These results pave the way for conformal low-temperature deposition of high-quality nickel thin films on three-dimensional structures.Keywords
Funding Information
- National Research Council Canada
- Defense Research and Development Canada
This publication has 42 references indexed in Scilit:
- Conformal Carbon Nanotube Coatings for Ceramic Composite StructuresMRS Advances, 2017
- A new method for fabricating ultrathin metal films as scratch-resistant flexible transparent electrodesJournal of Materiomics, 2015
- Laser perforated ultrathin metal films for transparent electrode applicationsOptics Express, 2015
- Interfacial Engineering of Ultrathin Metal Film Transparent Electrode for Flexible Organic Photovoltaic CellsAdvanced Materials, 2014
- Basics of Ultrathin Metal Films and Their Use as Transparent Electrodes2013
- Ultra-thin metal films for enhanced solar absorptionNano Energy, 2012
- Application of thin metal film elements in bioanalysisJournal of Separation Science, 2011
- Transparent and conductive electrodes based on unpatterned, thin metal filmsApplied Physics Letters, 2008
- Atomic Layer Deposition of Ultrathin Copper Metal Films from a Liquid Copper(I) Amidinate PrecursorJournal of the Electrochemical Society, 2006
- Direct Laser Writing on Electrolessly Deposited Thin Metal Films for Applications in Micro- and NanofluidicsLangmuir, 2004