Very high cycle fatigue crack initiation mechanism according to a 3D model of persistent slip bands formation in α‐ferrite
- 24 August 2015
- journal article
- research article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 38 (11) , 1324-1333
Abstract
Many studies on the behaviour of very high cycle fatigue (VHCF) showed that there appear some distinguishable features compared with the low and high cycle fatigue. The understanding of mechanism of fatigue crack initiation in VHCF is very important. In the present work, 1 mm thin sheet specimens on commercial pure iron were employed to perform tests under tension–compression cyclic loading at 20 kHz ultrasonic frequency. In situ observation was carried out with thermal and optical imaging. Local deformation marks on the specimen and the fracture surface near the crack initiation were investigated by scanning electron microscope. A micron abreast pipes 3D model has been constructed to illuminate the damage accumulation of irreversible deformation. It was found that the micron abreast pipes develop during previous cyclic loadings and remain unaffected at the fracture surface. A mechanism was established to explain the relationship between micron abreast pipes and fatigue crack initiation.Keywords
Funding Information
- Sichuan University (2014SCU11063)
This publication has 15 references indexed in Scilit:
- Gigacycle fatigue initiation mechanism in Armco ironInternational Journal of Fatigue, 2012
- Roles of microstructure in fatigue crack initiationInternational Journal of Fatigue, 2010
- Gigacycle fatigue of metallic aircraft componentsInternational Journal of Fatigue, 2010
- Study of thermal effects associated with crack propagation during very high cycle fatigue testsActa Materialia, 2008
- Effects of grain boundary- and triple junction-character on intergranular fatigue crack nucleation in polycrystalline aluminumJournal of Materials Science, 2008
- Factors influencing the mechanism of superlong fatigue failure in steelsFatigue & Fracture of Engineering Materials & Structures, 1999
- Influence of temperature and carbon content on the cyclic deformation and fatigue behaviour of α-iron. Part I. Cyclic deformation and stress–behaviourActa Materialia, 1998
- Orientation preference and fractal character of short fatigue cracks in a weld metalJournal of Materials Science, 1991
- Dislocation structures in fatigued iron-carbon alloysPhilosophical Magazine, 1965
- Observation of dislocation loop arrays in fatigued polycrystalline pure ironPhilosophical Magazine, 1965