Flame‐retardant rigid polyurethane foams prepared with amorphous sodium polyborate
Authors:
- 1 June 2011
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 122 (3) , 1707-1711
Abstract
Highly flame‐retardant rigid polyurethane (RPU) foams were prepared by vacuum impregnation or pressure impregnation of sodium polyborate (SPB) solution. The RPU foams (10 mm thickness, 134–690% SPB) endured the flame of a butane gas burner for 167–1144 s, and the backside temperatures remained below 45°C until penetration occurred. The heat releases from the RPU foams with 150 and 400% SPB in air in the cone calorimeter tests were 8.8 and 4.1 MJ/m2, respectively. The analyses with thermogravimetry, differential scanning calorimetry, and scanning electron microscopy indicated the flame‐retardant mechanism, in which the SPB foam and the formed char layer together insulated the inside from oxygen gas and heat. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011Keywords
This publication has 20 references indexed in Scilit:
- Halogen‐free flame‐retardant rigid polyurethane foams: Effect of alumina trihydrate and triphenylphosphate on the properties of polyurethane foamsJournal of Applied Polymer Science, 2010
- Ignition, combustion, toxicity, and fire retardancy of polyurethane foams: A comprehensive reviewJournal of Applied Polymer Science, 2008
- Effect of expandable graphite on the properties of intumescent flame‐retardant polyurethane foamJournal of Applied Polymer Science, 2008
- A Novel Sodium Silicate Fluoride Solution and a H2 Gas Formed by a Reaction Between Si and an Aqueous Solution of NaOH and NaFJournal of the American Ceramic Society, 2005
- Thermal decomposition, combustion and fire‐retardancy of polyurethanes—a review of the recent literaturePolymer International, 2004
- Commercial Flame Retardancy of PolyurethanesJournal of Fire Sciences, 2004
- Thermal degradation behavior of rigid polyurethane foams prepared with different fire retardant concentrations and blowing agentsPolymer, 2002
- Synthesis of aromatic polyester-siloxanes using 1,3-bis(p-hydroxyphenyl) disiloxanes as diol componentsJournal of Polymer Science Part C: Polymer Letters, 1990
- Block copolymers derived from azobiscyanopentanoic acid. XI. Properties of silicone–PMMA block copolymers prepared via polysiloxane(azobiscyanopentanamide)sJournal of Applied Polymer Science, 1988
- The Influence of Flame Retardants on the Smoke Emission of Polyamide CarpetsJournal of Fire Sciences, 1986